X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fu8500_href.h;h=6a225710c2c7ce8c448b12c6d64ccd03e503f8b9;hb=ef0f2f57524ec85fb9058a23298f2c4995e0d950;hp=636922c2f9cb71510848fc543072572174eabfcf;hpb=1dddf21db3ed1eaf24386fd8fabea71ee918fd3d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 636922c..6a22571 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -1,23 +1,7 @@
 /*
  * Copyright (C) ST-Ericsson SA 2009
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -28,14 +12,12 @@
  * (easy to change)
  */
 #define CONFIG_U8500
-#define CONFIG_L2_OFF
 
 #define CONFIG_SYS_MEMTEST_START	0x00000000
 #define CONFIG_SYS_MEMTEST_END	0x1FFFFFFF
-#define CONFIG_SYS_HZ		1000		/* must be 1000 */
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 
 /*
  * Size of malloc() pool
@@ -47,7 +29,6 @@
 #define CONFIG_ENV_SIZE		(128*1024)
 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 256*1024)
 #endif
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
 
 /*
  * PL011 Configuration
@@ -70,7 +51,6 @@
 				  (void *)CFG_SERIAL2 }
 #define CONFIG_CONS_INDEX	2
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Devices and file systems
@@ -82,21 +62,9 @@
 /*
  * Commands
  */
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EMMC
-#define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_I2C
 
 #ifndef CONFIG_BOOTDELAY
@@ -152,12 +120,10 @@
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 #define CONFIG_SYS_LOAD_ADDR		0x00100000 /* default load address */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_SETUP_MEMORY_TAGS	2
@@ -169,7 +135,6 @@
  */
 #define CONFIG_U8500_I2C
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0	/* slave addr of controller */
@@ -181,16 +146,6 @@
 
 #define CONFIG_SYS_I2C_GPIOE_ADDR	0x42	/* GPIO expander chip addr */
 #define CONFIG_TC35892_GPIO
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
-#endif
 
 /*
  * Physical Memory Map
@@ -225,7 +180,6 @@
 #define CONFIG_MMC_DEV_NUM		1
 
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_SAVEENV	/* CMD_ENV is obsolete but used in env_emmc.c */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		0x13F80000
 #define CONFIG_SYS_MMC_ENV_DEV          0               /* SLOT2: eMMC */