X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftx25.h;h=b11f54e653c1dd534f97488ead625b94322efc53;hb=0defddc851edfc34bcf3c3379fe74b11dc01a493;hp=996afa3b0706b3f066fed214f25bcd70a397df5e;hpb=1ed3b710d04e21dd34f61cfd129cbe18bef91598;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 996afa3..b11f54e 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -2,50 +2,49 @@ * (C) Copyright 2009 DENX Software Engineering * Author: John Rigby * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H +#include /* * KARO TX25 board - SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX25 -#define CONFIG_TX25 #define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */ -/* NAND BOOT is the only boot method */ -#define CONFIG_NAND_U_BOOT +#define CONFIG_SPL +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_MAX_SIZE 2048 +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT + +#define CONFIG_SPL_TEXT_BASE 0x810c0000 +#define CONFIG_SYS_TEXT_BASE 0x81200000 + +#ifndef MACH_TYPE_TX25 +#define MACH_TYPE_TX25 2177 +#endif -#ifdef CONFIG_NAND_SPL +#define CONFIG_MACH_TYPE MACH_TYPE_TX25 + +#ifdef CONFIG_SPL_BUILD /* Start copying real U-boot from the second page */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000 -#define CONFIG_SYS_NAND_U_BOOT_DST (0x81200000) +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_SPARE_SIZE 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024) @@ -56,17 +55,15 @@ #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* * Memory Info */ /* malloc() len */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -/* reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Board has 2 32MB banks of DRAM but there is a bug when using * both so only the first is configured @@ -82,22 +79,22 @@ /* 8MB DRAM test */ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000) -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ /* * Serial Info */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX25_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_MXC_GPIO /* * Flash & Environment */ /* No NOR flash present */ -#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN #define CONFIG_ENV_SIZE (128 * 1024) /* 128 kB NAND block size */ @@ -105,7 +102,6 @@ /* NAND */ #define CONFIG_NAND_MXC -#define CONFIG_NAND_MXC_V1_1 #define CONFIG_MXC_NAND_REGS_BASE (0xBB000000) #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (0xBB000000) @@ -113,10 +109,7 @@ #define CONFIG_MXC_NAND_HWECC #define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_64BIT_VSPRINTF - /* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print buffer sz */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -139,8 +132,7 @@ #define CONFIG_FEC_MXC_PHYADDR 0x1f #define CONFIG_MII #define CONFIG_CMD_NET -#define CONFIG_NET_MULTI -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_ENV_OVERWRITE #define CONFIG_BOOTDELAY 5 @@ -148,9 +140,6 @@ #define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define xstr(s) str(s) -#define str(s) #s - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -164,7 +153,7 @@ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "addmisc=setenv bootargs ${bootargs}\0" \ "u-boot=tx25/u-boot.bin\0" \ - "kernel_addr_r=" xstr(CONFIG_LOADADDR) "\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ "hostname=tx25\0" \ "bootfile=tx25/uImage\0" \ "rootpath=/opt/eldk/arm\0" \ @@ -178,7 +167,6 @@ /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (IMX_RAM_BASE + IMX_RAM_SIZE) #endif /* __CONFIG_H */