X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fturris_omnia.h;h=9436a623d6fe749bab9ca3530fc82ed710d1350c;hb=166a77b34b30f64f7b12a3016b0bba49d568c52e;hp=018f54428bccc94cf066be59477ea622abeedbf3;hpb=86f578ee85a697afb980233312f9aac1d98816df;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 018f544..9436a62 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -16,23 +16,11 @@
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
-
-/* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_OFFSET		(3*(1 << 18)) /* 768KiB in */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
@@ -45,24 +33,11 @@
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
 #define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-
-#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
-/* SPL related SPI defines */
-# define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
-# define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
 
 #ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
 /* SPL related MMC defines */
-# define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
-# define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
 # ifdef CONFIG_SPL_BUILD
 #  define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
 # endif
@@ -97,8 +72,8 @@
 
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
-	BOOT_TARGET_DEVICES_USB(func) \
 	BOOT_TARGET_DEVICES_SCSI(func) \
+	BOOT_TARGET_DEVICES_USB(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
@@ -117,11 +92,35 @@
 
 #include <config_distro_bootcmd.h>
 
+/*
+ * The factory reset bootcommand on Omnia first sets all the front LEDs to green
+ * and then tries to load the rescue image from SPI flash memory and boot it
+ */
+#define TURRIS_OMNIA_BOOTCMD_RESCUE \
+	"i2c dev 2; " \
+	"i2c mw 0x2a.1 0x3 0x1c 1; " \
+	"i2c mw 0x2a.1 0x4 0x1c 1; " \
+	"mw.l 0x01000000 0x00ff000c; " \
+	"i2c write 0x01000000 0x2a.1 0x5 4 -s; " \
+	"setenv bootargs \"earlyprintk console=ttyS0,115200" \
+		" omniarescue=$omnia_reset rescue_mode=$omnia_reset\"; " \
+	"sf probe; " \
+	"sf read 0x1000000 0x100000 0x700000; " \
+	"lzmadec 0x1000000 0x1700000; " \
+	"if gpio input gpio@71_4; then " \
+		"bootm 0x1700000#sfp; " \
+	"else " \
+		"bootm 0x1700000; " \
+	"fi; " \
+	"bootz 0x1000000"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	RELOCATION_LIMITS_ENV_SETTINGS \
 	LOAD_ADDRESS_ENV_SETTINGS \
 	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"console=ttyS0,115200\0" \
+	"ethact=ethernet@34000\0" \
+	"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
 	BOOTENV
 
 #endif /* CONFIG_SPL_BUILD */