X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fturris_omnia.h;h=4d8a7c37dec35c162b2a56856f335a5e423eef14;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=44d5016fbf6f8815acd5117ab29cd3f88a40250e;hpb=ad105f5f869443c6b37617ea55091511a2be1579;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 44d5016..4d8a7c3 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -11,67 +11,19 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_MISC_INIT_R
-
 /*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
-
-/*
- * Commands configuration
- */
-
-/* I2C support */
-#define CONFIG_DM_I2C
-#define CONFIG_I2C_MUX
-#define CONFIG_I2C_MUX_PCA954x
-#define CONFIG_SPL_I2C_MUX
-#define CONFIG_SYS_I2C_MVTWSI
-
-/* Watchdog support */
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
-# define CONFIG_WATCHDOG
-#endif
-
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED		1000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
-
-/*
- * SDIO/MMC Card Configuration
- */
-#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE
-
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
 
 /* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_EHCI_IS_TDI
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_OFFSET		(3*(1 << 18)) /* 768KiB in */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
@@ -79,7 +31,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_TEXT_BASE		0x40000030
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
 
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
@@ -91,18 +42,10 @@
 
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-
-#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
-/* SPL related SPI defines */
-# define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
-# define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
+#define CONFIG_SPL_DRIVERS_MISC
 
 #ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
 /* SPL related MMC defines */
-# define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
-# define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
 # ifdef CONFIG_SPL_BUILD
 #  define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
 # endif
@@ -129,8 +72,15 @@
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
+#ifdef CONFIG_SCSI
+#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
+#else
+#define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_SCSI(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
@@ -150,11 +100,35 @@
 
 #include <config_distro_bootcmd.h>
 
+/*
+ * The factory reset bootcommand on Omnia first sets all the front LEDs to green
+ * and then tries to load the rescue image from SPI flash memory and boot it
+ */
+#define TURRIS_OMNIA_BOOTCMD_RESCUE \
+	"i2c dev 2; " \
+	"i2c mw 0x2a.1 0x3 0x1c 1; " \
+	"i2c mw 0x2a.1 0x4 0x1c 1; " \
+	"mw.l 0x01000000 0x00ff000c; " \
+	"i2c write 0x01000000 0x2a.1 0x5 4 -s; " \
+	"setenv bootargs \"earlyprintk console=ttyS0,115200" \
+		" omniarescue=$omnia_reset rescue_mode=$omnia_reset\"; " \
+	"sf probe; " \
+	"sf read 0x1000000 0x100000 0x700000; " \
+	"lzmadec 0x1000000 0x1700000; " \
+	"if gpio input gpio@71_4; then " \
+		"bootm 0x1700000#sfp; " \
+	"else " \
+		"bootm 0x1700000; " \
+	"fi; " \
+	"bootz 0x1000000"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	RELOCATION_LIMITS_ENV_SETTINGS \
 	LOAD_ADDRESS_ENV_SETTINGS \
 	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"console=ttyS0,115200\0" \
+	"ethact=ethernet@34000\0" \
+	"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
 	BOOTENV
 
 #endif /* CONFIG_SPL_BUILD */