X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fturris_omnia.h;h=47b220ff9ee77c080a8caafe84cf8f36caf33b9f;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=abe1e99acda5343b37dd0cba75ea222344881772;hpb=7a4b0bc5fe70225ae3595ba81d1473c06fd6b83b;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index abe1e99..47b220f 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright (C) 2017 Marek Behun + * Copyright (C) 2017 Marek Behún * Copyright (C) 2016 Tomas Hlavacek */ @@ -16,15 +16,8 @@ * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. */ -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ - -/* USB/EHCI configuration */ -#define CONFIG_EHCI_IS_TDI /* Environment in SPI NOR flash */ -#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ -#define CONFIG_ENV_OFFSET ((1 << 20) - CONFIG_ENV_SIZE) -#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ @@ -33,35 +26,6 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT - -#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI -/* SPL related SPI defines */ -# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS -#endif - -#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC -/* SPL related MMC defines */ -# define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) -# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -# ifdef CONFIG_SPL_BUILD -# define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -# endif -#endif - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -71,28 +35,11 @@ /* Include the common distro boot environment */ #ifndef CONFIG_SPL_BUILD -#ifdef CONFIG_MMC -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) -#else -#define BOOT_TARGET_DEVICES_MMC(func) -#endif - -#ifdef CONFIG_USB_STORAGE -#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) -#else -#define BOOT_TARGET_DEVICES_USB(func) -#endif - -#ifdef CONFIG_SCSI -#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) -#else -#define BOOT_TARGET_DEVICES_SCSI(func) -#endif - #define BOOT_TARGET_DEVICES(func) \ - BOOT_TARGET_DEVICES_MMC(func) \ - BOOT_TARGET_DEVICES_SCSI(func) \ - BOOT_TARGET_DEVICES_USB(func) \ + func(MMC, mmc, 0) \ + func(NVME, nvme, 0) \ + func(SCSI, scsi, 0) \ + func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) @@ -111,12 +58,34 @@ #include -#define CONFIG_EXTRA_ENV_SETTINGS \ +/* + * The factory reset bootcommand on Omnia first sets all the front LEDs to green + * and then tries to load the rescue image from SPI flash memory and boot it + */ +#define TURRIS_OMNIA_BOOTCMD_RESCUE \ + "i2c dev 2; " \ + "i2c mw 0x2a.1 0x3 0x1c 1; " \ + "i2c mw 0x2a.1 0x4 0x1c 1; " \ + "mw.l 0x01000000 0x00ff000c; " \ + "i2c write 0x01000000 0x2a.1 0x5 4 -s; " \ + "setenv bootargs \"earlyprintk console=ttyS0,115200" \ + " omniarescue=$omnia_reset rescue_mode=$omnia_reset\"; " \ + "sf probe; " \ + "sf read 0x1000000 0x100000 0x700000; " \ + "lzmadec 0x1000000 0x1700000; " \ + "if gpio input gpio@71_4; then " \ + "bootm 0x1700000#sfp; " \ + "else " \ + "bootm 0x1700000; " \ + "fi; " \ + "bootz 0x1000000" + +#define CFG_EXTRA_ENV_SETTINGS \ RELOCATION_LIMITS_ENV_SETTINGS \ LOAD_ADDRESS_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0" \ - "ethact=ethernet@34000\0" \ + "bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \ BOOTENV #endif /* CONFIG_SPL_BUILD */