X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fturris_omnia.h;h=0b55c14d8bff63988bd6539e6b6ed2e85fc5ec55;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=6633540a10dc01040cb1cfb2d22ec9f6e92dd274;hpb=75670c81e48d4cdab791ab040f00062f2a997d78;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 6633540..0b55c14 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
  * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_TURRIS_OMNIA_H
@@ -12,9 +11,6 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_MISC_INIT_R
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
 /*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
@@ -22,61 +18,13 @@
  */
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
-/*
- * Commands configuration
- */
-
-/* I2C support */
-#define CONFIG_DM_I2C
-#define CONFIG_I2C_MUX
-#define CONFIG_I2C_MUX_PCA954x
-#define CONFIG_SPL_I2C_MUX
-#define CONFIG_SYS_I2C_MVTWSI
-
-/* Watchdog support */
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
-# define CONFIG_WATCHDOG
-#endif
-
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED		1000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
-
-/*
- * SDIO/MMC Card Configuration
- */
-#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE
-
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
-
 /* USB/EHCI configuration */
 #define CONFIG_EHCI_IS_TDI
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_OFFSET		(3*(1 << 18)) /* 768KiB in */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
 
-#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
@@ -84,7 +32,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_TEXT_BASE		0x40000030
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
 
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
@@ -98,14 +45,12 @@
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 
-#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_SPI
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
 /* SPL related SPI defines */
-# define CONFIG_SPL_SPI_LOAD
-# define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
 # define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
 #endif
 
-#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_MMC
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
 /* SPL related MMC defines */
 # define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
 # define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
@@ -122,7 +67,6 @@
 
 /* Include the common distro boot environment */
 #ifndef CONFIG_SPL_BUILD
-#include <config_distro_defaults.h>
 
 #ifdef CONFIG_MMC
 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
@@ -136,8 +80,15 @@
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
+#ifdef CONFIG_SCSI
+#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
+#else
+#define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_SCSI(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
@@ -162,6 +113,7 @@
 	LOAD_ADDRESS_ENV_SETTINGS \
 	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"console=ttyS0,115200\0" \
+	"ethact=ethernet@34000\0" \
 	BOOTENV
 
 #endif /* CONFIG_SPL_BUILD */