X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftseries.h;h=8ed9eb080d6624772d01f2975c9138a1d92e384c;hb=bb597c0eeb7ee2f6e983577d993c76a30dd3c2b4;hp=4265b8a4ffa2c76b4f34cdbe123a6e57a4b5d21e;hpb=1a2728ae4faf12874173de156b8a7e66cfbbeae5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 4265b8a..8ed9eb0 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -12,6 +12,7 @@
 #ifndef __CONFIG_TSERIES_H__
 #define __CONFIG_TSERIES_H__
 
+#include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
 /* ------------------------------------------------------------------------- */
 #define CONFIG_AM335X_LCD
@@ -30,6 +31,10 @@
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_BOOTCOUNT_AM33XX
+
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)
+
 /* Clock Defines */
 #define V_OSCK				26000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)
@@ -37,13 +42,10 @@
 #define CONFIG_POWER_TPS65217
 
 /* Support both device trees and ATAGs. */
-#define CONFIG_OF_LIBFDT
 #define CONFIG_USE_FDT			/* use fdt within board code */
-#define CONFIG_OF_BOARD_SETUP
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_CMD_BOOTZ
 /*#define CONFIG_MACH_TYPE		3589*/
 #define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/
 
@@ -52,7 +54,6 @@
  #define CONFIG_MMC
  #define CONFIG_GENERIC_MMC
  #define CONFIG_OMAP_HSMMC
- #define CONFIG_CMD_MMC
  #define CONFIG_SUPPORT_EMMC_BOOT
 /* RAW SD card / eMMC locations. */
  #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
@@ -194,7 +195,6 @@ MMCARGS
 
 #define CONFIG_BOOTCOMMAND \
 	"run defboot;"
-#define CONFIG_BOOTDELAY		0
 
 #ifdef CONFIG_NAND
 /*
@@ -204,7 +204,6 @@ MMCARGS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x8000000
 #define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_CMD_NAND
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
@@ -247,26 +246,15 @@ MMCARGS
 #define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-/* attention! not only for gadget, enables also highspeed in hostmode */
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
 #if defined(CONFIG_SPI_BOOT)
 /* McSPI IP block */
 #define CONFIG_SPI
 #define CONFIG_OMAP3_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_SPEED		24000000
 
 #define CONFIG_SPL_SPI_SUPPORT
@@ -308,13 +296,9 @@ MMCARGS
  */
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
 #define CONFIG_FS_EXT4
 #define CONFIG_EXT4_WRITE
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FS_GENERIC
 #endif /* CONFIG_MMC, ... */
 
 #endif	/* ! __CONFIG_TSERIES_H__ */