X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftrizepsiv.h;h=c1bfe31e46233cf32e6e1123e9291e4461bff172;hb=bb367b95f9204115bd6eac82e839b5590e6da4eb;hp=474349537bdd63c3f445426c1cb1f8593173fbef;hpb=37a3bda0c9c8a2ffbf7e2a9e121177a3385a0626;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 4743495..c1bfe31 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -40,15 +40,14 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA27X		1	/* This is an PXA27x CPU    */
+#define CONFIG_CPU_PXA27X		1	/* This is an PXA27x CPU    */
 
 #define CONFIG_MMC		1
-#define BOARD_LATE_INIT		1
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+#define CONFIG_BOARD_LATE_INIT
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 #define RTC
 
@@ -56,7 +55,6 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -66,10 +64,10 @@
  * select serial console configuration
  */
 #define CONFIG_PXA_SERIAL
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_FFUART	       1       /* we use FFUART on Conxs */
 #define CONFIG_BTUART	       1       /* we use BTUART on Conxs */
 #define CONFIG_STUART	       1       /* we use STUART on Conxs */
+#define CONFIG_CONS_INDEX	3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -150,7 +148,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 #ifdef CONFIG_SYS_HUSH_PARSER
@@ -172,27 +169,14 @@
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
 
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
 #endif
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
@@ -213,7 +197,7 @@
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
+#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
 
 /*
  * GPIO settings
@@ -291,7 +275,6 @@
 #define CONFIG_SYS_MCIO0_VAL		0x00008407
 #define CONFIG_SYS_MCIO1_VAL		0x0000c108
 
-#define CONFIG_NET_MULTI		1
 #define CONFIG_DRIVER_DM9000		1
 
 #if CONFIG_POLARIS