X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftrizepsiv.h;h=474349537bdd63c3f445426c1cb1f8593173fbef;hb=37a3bda0c9c8a2ffbf7e2a9e121177a3385a0626;hp=49173181fb5f47c5eac82ab423e9aeb4dbf5115d;hpb=712ac6a1a6909a58d6549fb220cc921a7e9f9979;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 4917318..4743495 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -65,6 +65,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_PXA_SERIAL
 #define CONFIG_SERIAL_MULTI
 #define CONFIG_FFUART	       1       /* we use FFUART on Conxs */
 #define CONFIG_BTUART	       1       /* we use BTUART on Conxs */
@@ -211,6 +212,9 @@
 
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define	CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
+
 /*
  * GPIO settings
  */
@@ -238,11 +242,17 @@
 #define CONFIG_SYS_GRER1_VAL		0x00000000
 #define CONFIG_SYS_GRER2_VAL		0x00000000
 #define CONFIG_SYS_GRER3_VAL		0x00000000
-#define CONFIG_SYS_GFER0_VAL		0x00000000
+
 #define CONFIG_SYS_GFER1_VAL		0x00000000
-#define CONFIG_SYS_GFER2_VAL		0x00000000
 #define CONFIG_SYS_GFER3_VAL		0x00000020
 
+#if CONFIG_POLARIS
+#define CONFIG_SYS_GFER0_VAL		0x00000001
+#define CONFIG_SYS_GFER2_VAL		0x00200000
+#else
+#define CONFIG_SYS_GFER0_VAL		0x00000000
+#define CONFIG_SYS_GFER2_VAL		0x00000000
+#endif
 
 #define CONFIG_SYS_PSSR_VAL		0x20	/* CHECK */
 
@@ -258,7 +268,11 @@
 
 #define CONFIG_SYS_MSC0_VAL		0x4df84df0
 #define CONFIG_SYS_MSC1_VAL		0x7ff87ff4
+#if CONFIG_POLARIS
+#define CONFIG_SYS_MSC2_VAL		0xa2697ff8
+#else
 #define CONFIG_SYS_MSC2_VAL		0xa26936d4
+#endif
 #define CONFIG_SYS_MDCNFG_VAL		0x880009C9
 #define CONFIG_SYS_MDREFR_VAL		0x20ca201e
 #define CONFIG_SYS_MDMRS_VAL		0x00220022
@@ -277,8 +291,15 @@
 #define CONFIG_SYS_MCIO0_VAL		0x00008407
 #define CONFIG_SYS_MCIO1_VAL		0x0000c108
 
+#define CONFIG_NET_MULTI		1
 #define CONFIG_DRIVER_DM9000		1
-#define CONFIG_DM9000_BASE	0x08000000
+
+#if CONFIG_POLARIS
+#define CONFIG_DM9000_BASE		0x0C800000
+#else
+#define CONFIG_DM9000_BASE		0x08000000
+#endif
+
 #define DM9000_IO			CONFIG_DM9000_BASE
 #define DM9000_DATA			(CONFIG_DM9000_BASE+0x8004)
 
@@ -310,6 +331,9 @@
 /* write flash less slowly */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
 
+/* Unlock to be used with Intel chips */
+#define CONFIG_SYS_FLASH_PROTECTION	1
+
 /* Flash environment locations */
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) /* Addr of Environment Sector	*/