X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftricorder.h;h=6c2f65305f0ad9fe9573a2dc2193f5c7e8ed304e;hb=222a3113b46c4a16de3f51747201ca6565c8ee6a;hp=d57394e55016e7b5f3ec80628e049dc73bc0b49c;hpb=60390d70be7336b2441f5f69bd4f5affa83d064d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index d57394e..6c2f653 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -35,6 +35,8 @@
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap3.h>
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Display CPU and Board information */
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -63,6 +65,9 @@
 /* GPIO support */
 #define CONFIG_OMAP_GPIO
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_2		/* GPIO32..63 are in GPIO bank 2 */
+
 /* LED support */
 #define CONFIG_STATUS_LED
 #define CONFIG_BOARD_SPECIFIC_LED
@@ -98,11 +103,11 @@
 #define CONFIG_DOS_PARTITION
 
 /* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
+ 
 
 /* EEPROM */
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
@@ -134,12 +139,11 @@
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
-
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_NAND_OMAP_BCH8
 #define CONFIG_BCH
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_MAX_ECCPOS	56
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -313,8 +317,6 @@
 #define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
 
 /* NAND and environment organization  */
-#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
@@ -366,14 +368,16 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{12, 13, 14, 15, 16, 17, 18, 19, 20,\
-			21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
-			34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\
-			47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\
-			60, 61, 62, 63}
+#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
+					 13, 14, 16, 17, 18, 19, 20, 21, 22, \
+					 23, 24, 25, 26, 27, 28, 30, 31, 32, \
+					 33, 34, 35, 36, 37, 38, 39, 40, 41, \
+					 42, 44, 45, 46, 47, 48, 49, 50, 51, \
+					 52, 53, 54, 55, 56}
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	13
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE