X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftricorder.h;h=683375a0df1a1c9a7de0711e77dd4ef565434b26;hb=f89d6133eef2e068f9c33853b6584d7fcbfa9d2e;hp=8fe4165a77f4946ca1a0aef78f38ef7dd78cd1eb;hpb=5c84ad097d829bb1e6460438f33e1536b23b3c9b;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 8fe4165..683375a 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2006-2008 * Texas Instruments. @@ -9,8 +10,6 @@ * Thomas Weber * * Configuration settings for the Tricorder board. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -23,9 +22,6 @@ * header. That is 0x800FFFC0--0x80100000 should not be used for any * other needs. */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 - -#define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ #include @@ -34,8 +30,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_MISC_INIT_R - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -52,71 +46,35 @@ #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ /* select serial console configuration */ -#define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} /* I2C */ #define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_EEPROM_BUS_NUM 1 /* TWL4030 */ -#define CONFIG_TWL4030_LED /* Board NAND Info */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ - "128k(SPL)," \ - "1m(u-boot)," \ - "384k(u-boot-env1)," \ - "1152k(mtdoops)," \ - "384k(u-boot-env2)," \ - "5m(kernel)," \ - "2m(fdt)," \ - "-(ubi)" - -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_BCH #define CONFIG_SYS_NAND_MAX_OOBFREE 2 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 -/* commands to include */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ -#define CONFIG_CMD_UBIFS /* UBIFS commands */ -#define CONFIG_LZO /* LZO is needed for UBIFS */ - -#undef CONFIG_CMD_JFFS2 /* JFFS2 Support */ - /* needed for ubi */ -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS /* Environment information (this is the common part) */ /* hang() the board on panic() */ -#define CONFIG_PANIC_HANG /* environment placement (for NAND), is different for FLASHCARD but does not * harm there */ @@ -135,8 +93,8 @@ "vram=3M\0" \ "defaultdisplay=lcd\0" \ "kernelopts=mtdoops.mtddev=3\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "commonargs=" \ "setenv bootargs console=${console} " \ "${mtdparts} " \ @@ -155,9 +113,6 @@ * which will not be influenced by any data already on the device. */ #ifdef CONFIG_FLASHCARD - -#define CONFIG_ENV_IS_NOWHERE - /* the rdaddr is 16 MiB before the loadaddr */ #define CONFIG_ENV_RDADDR "rdaddr=0x81000000\0" @@ -178,8 +133,6 @@ #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_IS_IN_NAND - #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_COMMON_ENV_SETTINGS \ "mmcargs=" \ @@ -224,17 +177,7 @@ #endif /* CONFIG_FLASHCARD */ /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* enable cmdline history */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x00000000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ @@ -251,7 +194,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 @@ -270,18 +212,13 @@ #define CONFIG_SYS_SRAM_SIZE 0x10000 /* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) @@ -314,6 +251,5 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_SCRATCH 0x81000000 #endif /* __CONFIG_H */