X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftricorder.h;h=683375a0df1a1c9a7de0711e77dd4ef565434b26;hb=f89d6133eef2e068f9c33853b6584d7fcbfa9d2e;hp=33071ef507b9d99715098dc1348b89f5b4be9cc3;hpb=2dc5b553b9bcd701bd7abd60f99f407cb0c37762;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 33071ef..683375a 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2006-2008
  * Texas Instruments.
@@ -9,8 +10,6 @@
  * Thomas Weber <weber@corscience.de>
  *
  * Configuration settings for the Tricorder board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -23,7 +22,6 @@
  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_TEXT_BASE		0x80100000
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
@@ -32,8 +30,6 @@
 #define V_OSCK				26000000 /* Clock output from T2 */
 #define V_SCLK				(V_OSCK >> 1)
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -50,16 +46,12 @@
 #define CONFIG_SYS_NS16550_CLK		48000000 /* 48MHz (APLL96/2) */
 
 /* select serial console configuration */
-#define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
  
 
 /* EEPROM */
@@ -67,24 +59,8 @@
 #define CONFIG_SYS_EEPROM_BUS_NUM	1
 
 /* TWL4030 */
-#define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:" \
-						"128k(SPL)," \
-						"1m(u-boot)," \
-						"384k(u-boot-env1)," \
-						"1152k(mtdoops)," \
-						"384k(u-boot-env2)," \
-						"5m(kernel)," \
-						"2m(fdt)," \
-						"-(ubi)"
-
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
@@ -94,14 +70,11 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 
 /* needed for ubi */
-#define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
 
 /* Environment information (this is the common part) */
 
 
 /* hang() the board on panic() */
-#define CONFIG_PANIC_HANG
 
 /* environment placement (for NAND), is different for FLASHCARD but does not
  * harm there */
@@ -120,8 +93,8 @@
 	"vram=3M\0" \
 	"defaultdisplay=lcd\0" \
 	"kernelopts=mtdoops.mtddev=3\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 	"commonargs=" \
 		"setenv bootargs console=${console} " \
 		"${mtdparts} " \
@@ -204,9 +177,6 @@
 #endif /* CONFIG_FLASHCARD */
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_CMDLINE_EDITING		/* enable cmdline history */
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0 + 0x00000000)
@@ -224,7 +194,6 @@
 #define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
 
 /*  Physical Memory Map  */
-#define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
 #define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
 
@@ -243,8 +212,6 @@
 #define CONFIG_SYS_SRAM_SIZE		0x10000
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
@@ -252,7 +219,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 
-#define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
 
@@ -285,6 +251,5 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
 
-#define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_SCRATCH	0x81000000
 #endif /* __CONFIG_H */