X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftrab.h;h=b9088a89abd89b0b1e69e03e27d1bb102f724913;hb=cfd60441d8360cb9ffa315ecf3a2aef9bc134905;hp=a2dc8e7bff8936ccb4137679c03f22d7464b070d;hpb=0855c50e6509d03ce2af1e9c4d1dc09ba426faa5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/trab.h b/include/configs/trab.h
index a2dc8e7..b9088a8 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -80,10 +80,17 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* USB stuff */
-#define CONFIG_USB_OHCI		1
+#define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_DOS_PARTITION	1
 
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+
+#define CFG_USB_OHCI_REGS_BASE	0x14200000
+#define CFG_USB_OHCI_SLOT_NAME	"s3c2400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 /*
  * Size of malloc() pool
  */
@@ -130,60 +137,50 @@
 /* Use s3c2400's RTC */
 #define CONFIG_RTC_S3C24X0	1
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
 #ifdef CONFIG_HWFLOW
-#define CONFIG_COMMANDS_ADD_HWFLOW	CFG_CMD_HWFLOW
-#else
-#define	CONFIG_COMMANDS_ADD_HWFLOW	0
+    #define CONFIG_CMD_HWFLOW
 #endif
 
 #ifdef	CONFIG_VFD
-#define CONFIG_COMMANDS_ADD_VFD		CFG_CMD_VFD
-#else
-#define CONFIG_COMMANDS_ADD_VFD		0
+    #define CONFIG_CMD_VFD
 #endif
 
 #ifdef CONFIG_DRIVER_S3C24X0_I2C
-#define CONFIG_COMMANDS_ADD_EEPROM	CFG_CMD_EEPROM
-#define CONFIG_COMMANDS_I2C		CFG_CMD_I2C
-#else
-#define CONFIG_COMMANDS_ADD_EEPROM	0
-#define CONFIG_COMMANDS_I2C		0
+    #define CONFIG_CMD_EEPROM
+    #define CONFIG_CMD_I2C
 #endif
 
 #ifndef USE_920T_MMU
-#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
-				CONFIG_COMMANDS_ADD_HWFLOW	| \
-				CONFIG_COMMANDS_ADD_VFD		| \
-				CONFIG_COMMANDS_ADD_EEPROM	| \
-				CONFIG_COMMANDS_I2C		| \
-				CFG_CMD_BSP			| \
-				CFG_CMD_DATE			| \
-				CFG_CMD_DHCP			| \
-				CFG_CMD_FAT			| \
-				CFG_CMD_NFS			| \
-				CFG_CMD_SNTP			| \
-				CFG_CMD_USB	)
-#else
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL			| \
-				CONFIG_COMMANDS_ADD_HWFLOW	| \
-				CONFIG_COMMANDS_ADD_VFD		| \
-				CONFIG_COMMANDS_ADD_EEPROM	| \
-				CONFIG_COMMANDS_I2C		| \
-				CFG_CMD_BSP			| \
-				CFG_CMD_DATE			| \
-				CFG_CMD_DHCP			| \
-				CFG_CMD_FAT			| \
-				CFG_CMD_NFS			| \
-				CFG_CMD_SNTP			| \
-				CFG_CMD_USB	)
+    #undef CONFIG_CMD_CACHE
 #endif
 
+
 /* moved up */
 #define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #define CONFIG_BOOTDELAY	5
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
 #define CONFIG_PREBOOT		"echo;echo *** booting ***;echo"
@@ -296,7 +293,7 @@
 #define CONFIG_AUTOBOOT_DELAY_STR	"R"	/* 1st "password"	*/
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
@@ -422,6 +419,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /* Initial value of the on-board touch screen brightness */
 #define CFG_BRIGHTNESS 0x20