X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=e7aa42d73cdff405758b18faa760fd2d90a79705;hb=69e173eb57d1f4848f070c83456096ba5d2ba1b4;hp=4859e038906b037ff0d16148b032c653474af076;hpb=563e53efaadd76def21612bcf9f0236d870b6e68;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 4859e03..e7aa42d 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,6 +9,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
 
@@ -22,6 +23,13 @@
 
 /* #endif */
 
+/* place code in last 4 MiB of RAM */
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#define CONFIG_SYS_TEXT_BASE		0x2fc00000
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define CONFIG_SYS_TEXT_BASE		0x4fc00000
+#endif
+
 #include "mx6_common.h"
 
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
@@ -40,8 +48,6 @@
 #define CONFIG_MXC_SPI
 
 /* SPI Flash */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE	SZ_64K
 
@@ -55,6 +61,8 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -93,10 +101,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -114,14 +118,6 @@
 
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_ITEST
-
-/* place code in last 4 MiB of RAM */
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-#define CONFIG_SYS_TEXT_BASE		0x2fc00000
-#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
-#define CONFIG_SYS_TEXT_BASE		0x4fc00000
-#endif
 
 #define CONFIG_ENV_SIZE			(SZ_8K)
 /* Size of malloc() pool */
@@ -367,10 +363,6 @@
 	"panicboot=echo No boot device !!! reset\0"                            \
 	TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-
 #define CONFIG_STACKSIZE		(128u * SZ_1K)
 
 /* Physical Memory Map */
@@ -386,7 +378,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE
@@ -398,6 +389,8 @@
  */
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
 #else
 #error "No baseboard for the TQMa6 defined!"
 #endif