X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=cb5f7fc25af98962a857488ee2ef4a268b75a0de;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=3c1d629d251f33e761b03c0513e8837ca4cee984;hpb=cb6617a77f81df47b72cc4115faf7bd5b1f7cfeb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 3c1d629..cb5f7fc 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -2,19 +2,14 @@
 /*
  * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
  *
- * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
+ * Configuration settings for the TQ-Systems TQMa6<Q,D,DL,S> module.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #include <linux/kconfig.h>
-/* SPL */
-/* #if defined(CONFIG_SPL_BUILD) */
-/* common IMX6 SPL configuration */
-#include "imx6_spl.h"
-
-/* #endif */
+#include <linux/stringify.h>
 
 /* place code in last 4 MiB of RAM */
 
@@ -28,49 +23,23 @@
 #define PHYS_SDRAM_SIZE			(SZ_1G)
 #endif
 
-#define CONFIG_MXC_UART
-
 /* SPI Flash */
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE	SZ_64K
 
 /* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		100000
-
-/* I2C EEPROM (M24C64) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR			0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN			2
-#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS		5 /* 32 Bytes */
-#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS	20
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
+#define CFG_I2C_MULTI_BUS
+
+#if !defined(CONFIG_DM_PMIC)
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 #define TQMA6_PFUZE100_I2C_BUS		2
+#endif
 
 /* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CFG_SYS_FSL_ESDHC_ADDR	0
 
 /* USB Configs */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-
-#define CONFIG_ARP_TIMEOUT		200UL
-
-#define CONFIG_ENV_SIZE			(SZ_8K)
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * SZ_1M)
 
 #if defined(CONFIG_TQMA6X_MMC_BOOT)
 
@@ -78,9 +47,6 @@
 #define TQMA6_UBOOT_SECTOR_START	0x2
 #define TQMA6_UBOOT_SECTOR_COUNT	0x7fe
 
-#define CONFIG_ENV_OFFSET		SZ_1M
-#define CONFIG_SYS_MMC_ENV_DEV		0
-
 #define TQMA6_FDT_OFFSET		(2 * SZ_1M)
 #define TQMA6_FDT_SECTOR_START		0x1000
 #define TQMA6_FDT_SECTOR_COUNT		0x800
@@ -135,9 +101,6 @@
 		"fi; fi; "                                                     \
 		"setenv filesize; setenv blkc \0"                              \
 
-#define CONFIG_BOOTCOMMAND \
-	"run mmcboot; run netboot; run panicboot"
-
 #elif defined(CONFIG_TQMA6X_SPI_BOOT)
 
 #define TQMA6_UBOOT_OFFSET		0x400
@@ -148,11 +111,6 @@
 #define TQMA6_UBOOT_SIZE		(TQMA6_UBOOT_SECTOR_SIZE * \
 					 TQMA6_UBOOT_SECTOR_COUNT)
 
-#define CONFIG_ENV_OFFSET		(TQMA6_UBOOT_SIZE)
-#define CONFIG_ENV_SECT_SIZE		TQMA6_SPI_FLASH_SECTOR_SIZE
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
-					 CONFIG_ENV_SECT_SIZE)
-
 #define TQMA6_FDT_OFFSET		(CONFIG_ENV_OFFSET_REDUND + \
 					 CONFIG_ENV_SECT_SIZE)
 #define TQMA6_FDT_SECT_SIZE		(TQMA6_SPI_FLASH_SECTOR_SIZE)
@@ -226,11 +184,7 @@
 		"setexpr offset ${fdt_start} * "                               \
 			__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "           \
 		"sf read ${fdt_addr} ${offset} ${size}; "                      \
-		"setenv size ; setenv offset\0"                                \
-
-#define CONFIG_BOOTCOMMAND                                                     \
-	"sf probe; run mmcboot; run netboot; run panicboot"                    \
-
+		"setenv size ; setenv offset\0"
 #else
 
 #error "need to define boot source"
@@ -243,7 +197,7 @@
 /* set to a resonable value, changeable by user */
 #define TQMA6_CMA_SIZE                 160M
 
-#define CONFIG_EXTRA_ENV_SETTINGS                                              \
+#define CFG_EXTRA_ENV_SETTINGS                                              \
 	"board=tqma6\0"                                                        \
 	"uimage=uImage\0"                                                      \
 	"zimage=zImage\0"                                                      \
@@ -313,14 +267,9 @@
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
 /*
  * All the defines above are for the TQMa6 SoM