X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=c11e5c1d88b566a538a247200056f136595125ae;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=895cd0324e17b24f7b428c646f727cfb58310de7;hpb=e4837da7828293ea49abc579f939c0f5c4b127c3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 895cd03..c11e5c1 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -2,13 +2,15 @@
 /*
  * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
  *
- * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
+ * Configuration settings for the TQ-Systems TQMa6<Q,D,DL,S> module.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #include <linux/kconfig.h>
+#include <linux/stringify.h>
+
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
 /* common IMX6 SPL configuration */
@@ -34,17 +36,12 @@
 
 /* I2C Configs */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		100000
 
 /* I2C EEPROM (M24C64) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR			0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN			2
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS		5 /* 32 Bytes */
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 #if !defined(CONFIG_DM_PMIC)
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 #define TQMA6_PFUZE100_I2C_BUS		2
@@ -58,22 +55,14 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 
-#define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 
-#define CONFIG_ARP_TIMEOUT		200UL
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * SZ_1M)
-
 #if defined(CONFIG_TQMA6X_MMC_BOOT)
 
 #define TQMA6_UBOOT_OFFSET		SZ_1K
 #define TQMA6_UBOOT_SECTOR_START	0x2
 #define TQMA6_UBOOT_SECTOR_COUNT	0x7fe
 
-#define CONFIG_SYS_MMC_ENV_DEV		0
-
 #define TQMA6_FDT_OFFSET		(2 * SZ_1M)
 #define TQMA6_FDT_SECTOR_START		0x1000
 #define TQMA6_FDT_SECTOR_COUNT		0x800
@@ -128,9 +117,6 @@
 		"fi; fi; "                                                     \
 		"setenv filesize; setenv blkc \0"                              \
 
-#define CONFIG_BOOTCOMMAND \
-	"run mmcboot; run netboot; run panicboot"
-
 #elif defined(CONFIG_TQMA6X_SPI_BOOT)
 
 #define TQMA6_UBOOT_OFFSET		0x400
@@ -214,11 +200,7 @@
 		"setexpr offset ${fdt_start} * "                               \
 			__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "           \
 		"sf read ${fdt_addr} ${offset} ${size}; "                      \
-		"setenv size ; setenv offset\0"                                \
-
-#define CONFIG_BOOTCOMMAND                                                     \
-	"sf probe; run mmcboot; run netboot; run panicboot"                    \
-
+		"setenv size ; setenv offset\0"
 #else
 
 #error "need to define boot source"