X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=9498dbeadf41138c2f30bf51becd61de63c7b9e9;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=1efe9d57a84ee64e834a647e8e9acebdf90db9b9;hpb=9d8665b7091d7d67df7dd31eafe1b54e25f6c3e4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 1efe9d5..9498dbe 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -2,7 +2,7 @@
 /*
  * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
  *
- * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
+ * Configuration settings for the TQ-Systems TQMa6<Q,D,DL,S> module.
  */
 
 #ifndef __CONFIG_H
@@ -37,10 +37,6 @@
 /* I2C Configs */
 #define CONFIG_I2C_MULTI_BUS
 
-/* I2C EEPROM (M24C64) */
-#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS		5 /* 32 Bytes */
-#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS	20
-
 #if !defined(CONFIG_DM_PMIC)
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
@@ -52,13 +48,6 @@
 
 /* USB Configs */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-
-#define CONFIG_ARP_TIMEOUT		200UL
 
 #if defined(CONFIG_TQMA6X_MMC_BOOT)
 
@@ -120,9 +109,6 @@
 		"fi; fi; "                                                     \
 		"setenv filesize; setenv blkc \0"                              \
 
-#define CONFIG_BOOTCOMMAND \
-	"run mmcboot; run netboot; run panicboot"
-
 #elif defined(CONFIG_TQMA6X_SPI_BOOT)
 
 #define TQMA6_UBOOT_OFFSET		0x400
@@ -206,11 +192,7 @@
 		"setexpr offset ${fdt_start} * "                               \
 			__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; "           \
 		"sf read ${fdt_addr} ${offset} ${size}; "                      \
-		"setenv size ; setenv offset\0"                                \
-
-#define CONFIG_BOOTCOMMAND                                                     \
-	"sf probe; run mmcboot; run netboot; run panicboot"                    \
-
+		"setenv size ; setenv offset\0"
 #else
 
 #error "need to define boot source"
@@ -297,11 +279,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /*
  * All the defines above are for the TQMa6 SoM
  *