X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=029eddd7d024bd567964f26eaae5367442d6f519;hb=8f2fe0c86c56175dd7d5d0e3bc26bef41f224f03;hp=4859e038906b037ff0d16148b032c653474af076;hpb=6eed3786c68c8a49d2986ac4f9f6e3071b769d41;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 4859e03..029eddd 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,19 +9,21 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
-
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_EXT_SUPPORT
-
 /* common IMX6 SPL configuration */
 #include "imx6_spl.h"
 
 /* #endif */
 
+/* place code in last 4 MiB of RAM */
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#define CONFIG_SYS_TEXT_BASE		0x2fc00000
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define CONFIG_SYS_TEXT_BASE		0x4fc00000
+#endif
+
 #include "mx6_common.h"
 
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
@@ -36,25 +38,22 @@
 #define CONFIG_MXC_UART
 
 /* SPI */
-#define CONFIG_CMD_SPI
 #define CONFIG_MXC_SPI
 
 /* SPI Flash */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE	SZ_64K
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS	0
 #define CONFIG_SF_DEFAULT_CS	0
 #define CONFIG_SF_DEFAULT_SPEED	50000000
 #define CONFIG_SF_DEFAULT_MODE	(SPI_MODE_0)
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -83,24 +82,14 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_PHYLIB
@@ -114,14 +103,6 @@
 
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_ITEST
-
-/* place code in last 4 MiB of RAM */
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-#define CONFIG_SYS_TEXT_BASE		0x2fc00000
-#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
-#define CONFIG_SYS_TEXT_BASE		0x4fc00000
-#endif
 
 #define CONFIG_ENV_SIZE			(SZ_8K)
 /* Size of malloc() pool */
@@ -291,7 +272,6 @@
 		"sf read ${${fdt_addr}} ${offset} ${size}; "                   \
 		"setenv size ; setenv offset\0"                                \
 
-
 #define CONFIG_BOOTCOMMAND                                                     \
 	"sf probe; run mmcboot; run netboot; run panicboot"                    \
 
@@ -367,10 +347,6 @@
 	"panicboot=echo No boot device !!! reset\0"                            \
 	TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-
 #define CONFIG_STACKSIZE		(128u * SZ_1K)
 
 /* Physical Memory Map */
@@ -386,11 +362,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 /*
  * All the defines above are for the TQMa6 SoM
  *
@@ -398,6 +369,8 @@
  */
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
 #else
 #error "No baseboard for the TQMa6 defined!"
 #endif