X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftopic_miami.h;h=3d48ab2352a792c5f581b37e5059bf1c23aa00d5;hb=b06da06dd41b9c72b06c9d03f434d4263bbf6bbd;hp=3b0fa29890ff98d2280d839c8ecc1abc7dd70f5a;hpb=9e40ea04e9f1a70a184504c9e2beb051eb2d9335;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index 3b0fa29..3d48ab2 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -1,22 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2014 Topic Embedded Products
  *
  * Configuration for Zynq Evaluation and Development Board - Miami
  * See zynq-common.h for Zynq common configs
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_TOPIC_MIAMI_H
 #define __CONFIG_TOPIC_MIAMI_H
 
-#define CONFIG_ZYNQ_PS_CLK_FREQ		33333333UL
-
-#define CONFIG_ZYNQ_I2C0
-#define CONFIG_ZYNQ_I2C1
 
 /* Speed up boot time by ignoring the environment which we never used */
-#define CONFIG_ENV_IS_NOWHERE
 
 #include "zynq-common.h"
 
@@ -46,26 +40,15 @@
 #undef CONFIG_SPL_FPGA_SUPPORT
 
 /* FPGA commands that we don't use */
-#undef CONFIG_CMD_FPGA_LOADMK
-#undef CONFIG_CMD_FPGA_LOADP
-#undef CONFIG_CMD_FPGA_LOADBP
-#undef CONFIG_CMD_FPGA_LOADFS
 
 /* Extras */
-#define CONFIG_CMD_MEMTEST
 #undef CONFIG_SYS_MEMTEST_START
 #define CONFIG_SYS_MEMTEST_START	0
 #undef CONFIG_SYS_MEMTEST_END
 #define CONFIG_SYS_MEMTEST_END	0x18000000
 
 /* Faster flash, ours may run at 108 MHz */
-#undef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED	108000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#undef CONFIG_SF_DUAL_FLASH
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
 #undef CONFIG_SPI_FLASH_WINBOND
-#undef CONFIG_SPI_FLASH_ISSI
 
 /* Setup proper boot sequences for Miami boards */
 
@@ -96,6 +79,7 @@
 # define EXTRA_ENV_USB
 #endif
 
+#define CONFIG_USE_PREBOOT
 #undef CONFIG_PREBOOT
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -110,7 +94,7 @@
 	"bootscript=autorun.scr\0" \
 	"loadbit_addr=0x100000\0"	\
 	"loadbootenv_addr=0x2000000\0" \
-	"kernel_size=0x400000\0"	\
+	"kernel_size=0x440000\0"	\
 	"devicetree_size=0x10000\0"	\
 	"boot_size=0xF00000\0"	\
 	"fdt_high=0x20000000\0"	\
@@ -141,9 +125,4 @@
 	"fi; fi; run $modeboot"
 #undef CONFIG_DISPLAY_BOARDINFO
 
-/* Further tweaks to reduce image size */
-#undef CONFIG_CMD_BOOTZ
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_AES
-
 #endif /* __CONFIG_TOPIC_MIAMI_H */