X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftopic_miami.h;h=0e4a824c4242ac269e4454d53cea4d57047c7904;hb=702de89cc6a34c1c23dd3d987b0472b2cecdb63c;hp=23160bd88d71d4a8c1ade30b0478ac08c4c87373;hpb=a6d4cd4778bcc30f451f2d5d92ec4722ff5b71cc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index 23160bd..0e4a824 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -1,33 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2014 Topic Embedded Products
  *
  * Configuration for Zynq Evaluation and Development Board - Miami
  * See zynq-common.h for Zynq common configs
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_TOPIC_MIAMI_H
 #define __CONFIG_TOPIC_MIAMI_H
 
-#define CONFIG_ZYNQ_I2C0
-#define CONFIG_ZYNQ_I2C1
 
 /* Speed up boot time by ignoring the environment which we never used */
-#define CONFIG_ENV_IS_NOWHERE
 
 #include "zynq-common.h"
 
 /* Fixup settings */
-#undef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE			0x8000
-#undef CONFIG_ENV_OFFSET
-#define CONFIG_ENV_OFFSET		0x80000
 
 /* SPL settings */
 #undef CONFIG_SPL_ETH_SUPPORT
-#undef CONFIG_SYS_SPI_U_BOOT_OFFS
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 #undef CONFIG_SPL_MAX_FOOTPRINT
 #define CONFIG_SPL_MAX_FOOTPRINT	CONFIG_SYS_SPI_U_BOOT_OFFS
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
@@ -44,26 +34,11 @@
 #undef CONFIG_SPL_FPGA_SUPPORT
 
 /* FPGA commands that we don't use */
-#undef CONFIG_CMD_FPGA_LOADMK
-#undef CONFIG_CMD_FPGA_LOADP
-#undef CONFIG_CMD_FPGA_LOADBP
-#undef CONFIG_CMD_FPGA_LOADFS
 
 /* Extras */
-#define CONFIG_CMD_MEMTEST
-#undef CONFIG_SYS_MEMTEST_START
-#define CONFIG_SYS_MEMTEST_START	0
-#undef CONFIG_SYS_MEMTEST_END
-#define CONFIG_SYS_MEMTEST_END	0x18000000
 
 /* Faster flash, ours may run at 108 MHz */
-#undef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED	108000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#undef CONFIG_SF_DUAL_FLASH
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
 #undef CONFIG_SPI_FLASH_WINBOND
-#undef CONFIG_SPI_FLASH_ISSI
 
 /* Setup proper boot sequences for Miami boards */
 
@@ -94,8 +69,6 @@
 # define EXTRA_ENV_USB
 #endif
 
-#undef CONFIG_PREBOOT
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"kernel_image=uImage\0"	\
@@ -139,8 +112,4 @@
 	"fi; fi; run $modeboot"
 #undef CONFIG_DISPLAY_BOARDINFO
 
-/* Further tweaks to reduce image size */
-#undef CONFIG_CMD_BOOTZ
-#undef CONFIG_CMD_NET
-
 #endif /* __CONFIG_TOPIC_MIAMI_H */