X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_omap4_common.h;h=6c3380441da4c4a3e88070d7517d3be8646c662e;hb=6eed3786c68c8a49d2986ac4f9f6e3071b769d41;hp=77fbfb641006c649e04c6bfebe3ef109d558d17b;hpb=d3289aac64c5785d782b8a6e1ab2112e1e463b33;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 77fbfb6..6c33804 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -15,7 +15,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP44XX		1	/* which is a 44XX */
 #define CONFIG_OMAP4430		1	/* which is in a 4430 */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_ARCH_CPU_INIT
@@ -80,7 +79,6 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
 
 /* Per-Soc commands */
-#undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
 
 /*
@@ -102,16 +100,20 @@
 		"vram=${vram} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
 		"source ${loadaddr}\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
 		"env import -t ${loadaddr} ${filesize}\0" \
 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
 		"run mmcargs; " \
 		"bootz ${loadaddr} - ${fdtaddr}\0" \
+	"uimageboot=echo Booting from mmc${mmcdev} ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
 	"findfdt="\
 		"if test $board_name = sdp4430; then " \
 			"setenv fdtfile omap4-sdp.dtb; fi; " \
@@ -121,6 +123,8 @@
 			"setenv fdtfile omap4-panda-a4.dtb; fi;" \
 		"if test $board_name = panda-es; then " \
 			"setenv fdtfile omap4-panda-es.dtb; fi;" \
+		"if test $board_name = duovero; then " \
+			"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
@@ -144,6 +148,9 @@
 			"run loadfdt;" \
 			"run mmcboot; " \
 		"fi; " \
+		"if run loaduimage; then " \
+			"run uimageboot;" \
+		"fi; " \
 	"fi"
 
 /*
@@ -159,6 +166,9 @@
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 
+/* SPL: Allow to use an EXT partition */
+#define CONFIG_SPL_EXT_SUPPORT
+
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
 #endif