X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_keystone2.h;h=d120c691e0e3ef802a21894519eedf7242ae9afa;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=7fccbf6d509e1429fc6b5b5a2dc77dccf7e96db5;hpb=e404ade42d72513ea51d66b9474bcce194bab848;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 7fccbf6..d120c69 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -14,8 +14,6 @@
 
 /* U-Boot Build Configuration */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is a 2nd stage loader */
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 
 /* SoC Configuration */
 #define CONFIG_ARCH_CPU_INIT
@@ -54,7 +52,6 @@
 					CONFIG_SYS_SPL_MALLOC_SIZE + \
 					SPL_MALLOC_F_SIZE + \
 					CONFIG_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 
@@ -69,14 +66,14 @@
 #define CONFIG_CONS_INDEX		1
 
 #ifndef CONFIG_SOC_K2G
-#define CONFIG_SYS_NS16550_CLK		clk_get_rate(KS2_CLK1_6)
+#define CONFIG_SYS_NS16550_CLK		ks_clk_get_rate(KS2_CLK1_6)
 #else
-#define CONFIG_SYS_NS16550_CLK		clk_get_rate(uart_pll_clk) / 2
+#define CONFIG_SYS_NS16550_CLK		ks_clk_get_rate(uart_pll_clk) / 2
 #endif
 
 /* SPI Configuration */
 #define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI_CLK		clk_get_rate(KS2_CLK1_6)
+#define CONFIG_SYS_SPI_CLK		ks_clk_get_rate(KS2_CLK1_6)
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_SYS_SPI0
@@ -196,7 +193,6 @@
 /* USB Configuration */
 #define CONFIG_USB_XHCI_KEYSTONE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
-#define CONFIG_EFI_PARTITION
 #define CONFIG_FS_FAT
 #define CONFIG_USB_SS_BASE			KS2_USB_SS_BASE
 #define CONFIG_USB_HOST_XHCI_BASE		KS2_USB_HOST_XHCI_BASE
@@ -205,7 +201,6 @@
 
 /* U-Boot command configuration */
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_EEPROM
 
@@ -223,6 +218,8 @@
 	"set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0"		\
 	"init_fw_rd_net=dhcp ${rdaddr} ${tftp_root}/${name_fw_rd}; "	\
 		"run set_rd_spec\0"					\
+	"init_fw_rd_nfs=nfs ${rdaddr} ${nfs_root}/boot/${name_fw_rd}; "	\
+		"run set_rd_spec\0"					\
 	"init_fw_rd_ramfs=setenv rd_spec -\0"				\
 	"init_fw_rd_ubi=ubifsload ${rdaddr} ${bootdir}/${name_fw_rd}; "	\
 		"run set_rd_spec\0"					\
@@ -231,6 +228,7 @@
 	"set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
 	"dev_pmmc=0\0"							\
 	"get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0"	\
+	"get_pmmc_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_pmmc}\0"	\
 	"get_pmmc_ramfs=run get_pmmc_net\0"				\
 	"get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} "		\
 			"${bootdir}/${name_pmmc}\0"			\
@@ -249,6 +247,7 @@
 	"addr_ubi=0x82000000\0"						\
 	"addr_secdb_key=0xc000000\0"					\
 	"name_kern=zImage\0"						\
+	"addr_mon=0x87000000\0"						\
 	"run_mon=mon_install ${addr_mon}\0"				\
 	"run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0"		\
 	"init_net=run args_all args_net\0"				\
@@ -293,8 +292,8 @@
 
 #ifndef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND						\
-	"run init_${boot} init_fw_rd_${boot} get_fdt_${boot} "		\
-		"get_mon_${boot} get_kern_${boot} run_mon run_kern"
+	"run init_${boot} get_mon_${boot} run_mon init_fw_rd_${boot} "	\
+	"get_fdt_${boot} get_kern_${boot} run_kern"
 #endif
 
 #define CONFIG_BOOTARGS							\
@@ -302,20 +301,11 @@
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
 
-/* We wont be loading up OS from SPL for now.. */
-#undef CONFIG_SPL_OS_BOOT
-
-/* We do not have MMC support.. yet.. */
-#undef CONFIG_MMC
-#undef CONFIG_GENERIC_MMC
-
-/* And no support for GPIO, yet.. */
-
 /* we may include files below only after all above definitions */
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
 #ifndef CONFIG_SOC_K2G
-#define CONFIG_SYS_HZ_CLOCK		clk_get_rate(KS2_CLK1_6)
+#define CONFIG_SYS_HZ_CLOCK		ks_clk_get_rate(KS2_CLK1_6)
 #else
 #define CONFIG_SYS_HZ_CLOCK		external_clk[sys_clk]
 #endif