X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_keystone2.h;h=c830c0c0bf6863afc76ab8fa8c362dcb7b52091f;hb=067716bac59716b07f1ee70d9bf6e5528289bb45;hp=af89f7090f954a8b044fdebb693a5337f00bbfb4;hpb=e22b1a54942d9003b10564325a34e3cf767556ce;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index af89f70..c830c0c 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -15,11 +15,14 @@
 /* U-Boot Build Configuration */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is a 2nd stage loader */
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
 
 /* SoC Configuration */
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_TEXT_BASE		0x0c001000
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE		0x0c000000
+#endif
 #define CONFIG_SPL_TARGET		"u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF
 
@@ -28,9 +31,15 @@
 #define CONFIG_SYS_LPAE_SDRAM_BASE	0x800000000
 #define CONFIG_MAX_RAM_BANK_SIZE	(2 << 30)       /* 2GB */
 #define CONFIG_STACKSIZE		(512 << 10)     /* 512 KiB */
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - \
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SPL_TEXT_BASE - \
 					GENERATED_GBL_DATA_SIZE)
 
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+#define SPL_MALLOC_F_SIZE	CONFIG_SYS_MALLOC_F_LEN
+#else
+#define SPL_MALLOC_F_SIZE	0
+#endif
+
 /* SPL SPI Loader Configuration */
 #define CONFIG_SPL_PAD_TO		65536
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_PAD_TO - 8)
@@ -43,6 +52,7 @@
 #define CONFIG_SPL_STACK_SIZE		(8 * 1024)
 #define CONFIG_SPL_STACK		(CONFIG_SYS_SPL_MALLOC_START + \
 					CONFIG_SYS_SPL_MALLOC_SIZE + \
+					SPL_MALLOC_F_SIZE + \
 					CONFIG_SPL_STACK_SIZE - 4)
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
@@ -50,17 +60,22 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 
 /* UART Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_MEM32
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
+#endif
 #define CONFIG_SYS_NS16550_COM1		KS2_UART0_BASE
 #define CONFIG_SYS_NS16550_COM2		KS2_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK		clk_get_rate(KS2_CLK1_6)
 #define CONFIG_CONS_INDEX		1
 
+#ifndef CONFIG_SOC_K2G
+#define CONFIG_SYS_NS16550_CLK		clk_get_rate(KS2_CLK1_6)
+#else
+#define CONFIG_SYS_NS16550_CLK		clk_get_rate(uart_pll_clk) / 2
+#endif
+
 /* SPI Configuration */
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_CLK		clk_get_rate(KS2_CLK1_6)
 #define CONFIG_SF_DEFAULT_SPEED		30000000
@@ -74,6 +89,10 @@
 #define CONFIG_SYS_SPI2
 #define CONFIG_SYS_SPI2_BASE		KS2_SPI2_BASE
 #define CONFIG_SYS_SPI2_NUM_CS		4
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#endif
 
 /* Network Configuration */
 #define CONFIG_PHYLIB
@@ -130,8 +149,6 @@
 /* SerDes */
 #define CONFIG_TI_KEYSTONE_SERDES
 
-/* AEMIF */
-#define CONFIG_TI_AEMIF
 #define CONFIG_AEMIF_CNTRL_BASE		KS2_AEMIF_CNTRL_BASE
 
 /* I2C Configuration */
@@ -145,7 +162,6 @@
 #define I2C_BUS_MAX			3
 
 /* EEPROM definitions */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
@@ -179,28 +195,21 @@
 					"-(ubifs)"
 
 /* USB Configuration */
-#define CONFIG_USB_XHCI
-#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_XHCI_KEYSTONE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE
 #define CONFIG_EFI_PARTITION
 #define CONFIG_FS_FAT
-#define CONFIG_SYS_CACHELINE_SIZE		64
 #define CONFIG_USB_SS_BASE			KS2_USB_SS_BASE
 #define CONFIG_USB_HOST_XHCI_BASE		KS2_USB_HOST_XHCI_BASE
 #define CONFIG_DEV_USB_PHY_BASE			KS2_DEV_USB_PHY_BASE
 #define CONFIG_USB_PHY_CFG_BASE			KS2_USB_PHY_CFG_BASE
 
 /* U-Boot command configuration */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_SF
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_USB
 
 /* U-Boot general configuration */
 #define CONFIG_MISC_INIT_R
@@ -211,31 +220,55 @@
 /* EDMA3 */
 #define CONFIG_TI_EDMA3
 
+#define DEFAULT_FW_INITRAMFS_BOOT_ENV					\
+	"name_fw_rd=k2-fw-initrd.cpio.gz\0"				\
+	"set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0"		\
+	"init_fw_rd_net=dhcp ${rdaddr} ${tftp_root}/${name_fw_rd}; "	\
+		"run set_rd_spec\0"					\
+	"init_fw_rd_ramfs=setenv rd_spec -\0"				\
+	"init_fw_rd_ubi=ubifsload ${rdaddr} ${bootdir}/${name_fw_rd}; "	\
+		"run set_rd_spec\0"					\
+
+#define DEFAULT_PMMC_BOOT_ENV						\
+	"set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
+	"dev_pmmc=0\0"							\
+	"get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0"	\
+	"get_pmmc_ramfs=run get_pmmc_net\0"				\
+	"get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} "		\
+			"${bootdir}/${name_pmmc}\0"			\
+	"get_pmmc_ubi=ubifsload ${loadaddr} ${bootdir}/${name_pmmc}\0"	\
+	"run_pmmc=rproc init; rproc list; "				\
+		"rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; "	\
+		"rproc start ${dev_pmmc}\0"				\
+
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_LINUX_BOOT_ENV						\
 	CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
-	"boot=ubi\0"							\
+	"bootdir=/boot\0" \
 	"tftp_root=/\0"							\
 	"nfs_root=/export\0"						\
 	"mem_lpae=1\0"							\
-	"mem_reserve=512M\0"						\
 	"addr_ubi=0x82000000\0"						\
 	"addr_secdb_key=0xc000000\0"					\
 	"name_kern=zImage\0"						\
 	"run_mon=mon_install ${addr_mon}\0"				\
-	"run_kern=bootz ${loadaddr} - ${fdtaddr}\0"			\
+	"run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0"		\
 	"init_net=run args_all args_net\0"				\
+	"init_nfs=setenv autoload no; dhcp; run args_all args_net\0"	\
 	"init_ubi=run args_all args_ubi; "				\
-		"ubi part ubifs; ubifsmount ubi:boot;"			\
-		"ubifsload ${addr_secdb_key} securedb.key.bin;\0"       \
+		"ubi part ubifs; ubifsmount ubi:rootfs;\0"			\
 	"get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"	\
-	"get_fdt_ubi=ubifsload ${fdtaddr} ${name_fdt}\0"		\
+	"get_fdt_nfs=nfs ${fdtaddr} ${nfs_root}/boot/${name_fdt}\0"	\
+	"get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0"		\
 	"get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"	\
-	"get_kern_ubi=ubifsload ${loadaddr} ${name_kern}\0"		\
+	"get_kern_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_kern}\0"	\
+	"get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0"		\
 	"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
-	"get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0"		\
+	"get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0"	\
+	"get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0"		\
 	"get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0"	\
-	"burn_uboot_spi=sf probe; sf erase 0 0x100000; "		\
+	"get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
+	"burn_uboot_spi=sf probe; sf erase 0 0x80000; "		\
 		"sf write ${loadaddr} 0 ${filesize}\0"		\
 	"burn_uboot_nand=nand erase 0 0x100000; "			\
 		"nand write ${loadaddr} 0 ${filesize}\0"		\
@@ -249,25 +282,25 @@
 	"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
 	"get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0"	\
 	"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"	\
+	"get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0"	\
 	"burn_ubi=nand erase.part ubifs; "				\
 		"nand write ${addr_ubi} ubifs ${filesize}\0"		\
 	"init_ramfs=run args_all args_ramfs get_fs_ramfs\0"		\
 	"args_ramfs=setenv bootargs ${bootargs} "			\
 		"rdinit=/sbin/init rw root=/dev/ram0 "			\
-		"initrd=0x802000000,9M\0"				\
+		"initrd=0x808080000,80M\0"				\
 	"no_post=1\0"							\
 	"mtdparts=mtdparts=davinci_nand.0:"				\
 		"1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
 
+#ifndef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND						\
-	"run init_${boot} get_fdt_${boot} get_mon_${boot} "		\
-		"get_kern_${boot} run_mon run_kern"
+	"run init_${boot} init_fw_rd_${boot} get_fdt_${boot} "		\
+		"get_mon_${boot} get_kern_${boot} run_mon run_kern"
+#endif
 
 #define CONFIG_BOOTARGS							\
 
-/* Linux interfacing */
-#define CONFIG_OF_BOARD_SETUP
-
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
 
@@ -281,15 +314,17 @@
 #undef CONFIG_SPL_EXT_SUPPORT
 #undef CONFIG_MMC
 #undef CONFIG_GENERIC_MMC
-#undef CONFIG_CMD_MMC
 
 /* And no support for GPIO, yet.. */
 #undef CONFIG_SPL_GPIO_SUPPORT
-#undef CONFIG_CMD_GPIO
 
 /* we may include files below only after all above definitions */
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
+#ifndef CONFIG_SOC_K2G
 #define CONFIG_SYS_HZ_CLOCK		clk_get_rate(KS2_CLK1_6)
+#else
+#define CONFIG_SYS_HZ_CLOCK		external_clk[sys_clk]
+#endif
 
 #endif /* __CONFIG_KS2_EVM_H */