X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_keystone2.h;h=3fadef7a0afa0368d3bf9dcebe24ffe4d5bb0434;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=707106ffab8d3c8afb33793b1fb0964b2353381e;hpb=3fc304b8d77ce6646d38ae506e9fae74b9975631;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 707106f..3fadef7 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -14,8 +14,6 @@
 
 /* U-Boot Build Configuration */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is a 2nd stage loader */
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 
 /* SoC Configuration */
 #define CONFIG_ARCH_CPU_INIT
@@ -30,7 +28,6 @@
 #define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_LPAE_SDRAM_BASE	0x800000000
 #define CONFIG_MAX_RAM_BANK_SIZE	(2 << 30)       /* 2GB */
-#define CONFIG_STACKSIZE		(512 << 10)     /* 512 KiB */
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SPL_TEXT_BASE - \
 					GENERATED_GBL_DATA_SIZE)
 
@@ -49,16 +46,21 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	(32 * 1024)
-#define CONFIG_SPL_STACK_SIZE		(8 * 1024)
+#define KEYSTONE_SPL_STACK_SIZE		(8 * 1024)
 #define CONFIG_SPL_STACK		(CONFIG_SYS_SPL_MALLOC_START + \
 					CONFIG_SYS_SPL_MALLOC_SIZE + \
 					SPL_MALLOC_F_SIZE + \
-					CONFIG_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
+					KEYSTONE_SPL_STACK_SIZE - 4)
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 
+/* SRAM scratch space entries  */
+#define SRAM_SCRATCH_SPACE_ADDR	CONFIG_SPL_STACK + 0x8
+
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START	(SRAM_SCRATCH_SPACE_ADDR)
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_END	(SRAM_SCRATCH_SPACE_ADDR + 0x200)
+#define KEYSTONE_SRAM_SCRATCH_SPACE_END		(TI_SRAM_SCRATCH_BOARD_EEPROM_END)
+
 /* UART Configuration */
 #define CONFIG_SYS_NS16550_MEM32
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
@@ -70,14 +72,14 @@
 #define CONFIG_CONS_INDEX		1
 
 #ifndef CONFIG_SOC_K2G
-#define CONFIG_SYS_NS16550_CLK		clk_get_rate(KS2_CLK1_6)
+#define CONFIG_SYS_NS16550_CLK		ks_clk_get_rate(KS2_CLK1_6)
 #else
-#define CONFIG_SYS_NS16550_CLK		clk_get_rate(uart_pll_clk) / 2
+#define CONFIG_SYS_NS16550_CLK		ks_clk_get_rate(uart_pll_clk) / 2
 #endif
 
 /* SPI Configuration */
 #define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI_CLK		clk_get_rate(KS2_CLK1_6)
+#define CONFIG_SYS_SPI_CLK		ks_clk_get_rate(KS2_CLK1_6)
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_SYS_SPI0
@@ -89,6 +91,10 @@
 #define CONFIG_SYS_SPI2
 #define CONFIG_SYS_SPI2_BASE		KS2_SPI2_BASE
 #define CONFIG_SYS_SPI2_NUM_CS		4
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#endif
 
 /* Network Configuration */
 #define CONFIG_PHYLIB
@@ -179,12 +185,7 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_MAX_CHIPS		1
 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#define CONFIG_ENV_SIZE				(256 << 10)  /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET			0x100000
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define MTDIDS_DEFAULT			"nand0=davinci_nand.0"
 #define MTDPARTS_DEFAULT		"mtdparts=davinci_nand.0:" \
 					"1024k(bootloader)ro,512k(params)ro," \
@@ -193,10 +194,6 @@
 /* USB Configuration */
 #define CONFIG_USB_XHCI_KEYSTONE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FS_FAT
-#define CONFIG_SYS_CACHELINE_SIZE		64
 #define CONFIG_USB_SS_BASE			KS2_USB_SS_BASE
 #define CONFIG_USB_HOST_XHCI_BASE		KS2_USB_HOST_XHCI_BASE
 #define CONFIG_DEV_USB_PHY_BASE			KS2_DEV_USB_PHY_BASE
@@ -204,24 +201,26 @@
 
 /* U-Boot command configuration */
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_EEPROM
 
 /* U-Boot general configuration */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 #define CONFIG_TIMESTAMP
 
 /* EDMA3 */
 #define CONFIG_TI_EDMA3
 
+#define KERNEL_MTD_PARTS						\
+	"mtdparts="							\
+	SPI_MTD_PARTS
+
 #define DEFAULT_FW_INITRAMFS_BOOT_ENV					\
 	"name_fw_rd=k2-fw-initrd.cpio.gz\0"				\
 	"set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0"		\
 	"init_fw_rd_net=dhcp ${rdaddr} ${tftp_root}/${name_fw_rd}; "	\
 		"run set_rd_spec\0"					\
+	"init_fw_rd_nfs=nfs ${rdaddr} ${nfs_root}/boot/${name_fw_rd}; "	\
+		"run set_rd_spec\0"					\
 	"init_fw_rd_ramfs=setenv rd_spec -\0"				\
 	"init_fw_rd_ubi=ubifsload ${rdaddr} ${bootdir}/${name_fw_rd}; "	\
 		"run set_rd_spec\0"					\
@@ -230,6 +229,7 @@
 	"set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
 	"dev_pmmc=0\0"							\
 	"get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0"	\
+	"get_pmmc_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_pmmc}\0"	\
 	"get_pmmc_ramfs=run get_pmmc_net\0"				\
 	"get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} "		\
 			"${bootdir}/${name_pmmc}\0"			\
@@ -245,10 +245,10 @@
 	"tftp_root=/\0"							\
 	"nfs_root=/export\0"						\
 	"mem_lpae=1\0"							\
-	"mem_reserve=512M\0"						\
 	"addr_ubi=0x82000000\0"						\
 	"addr_secdb_key=0xc000000\0"					\
 	"name_kern=zImage\0"						\
+	"addr_mon=0x87000000\0"						\
 	"run_mon=mon_install ${addr_mon}\0"				\
 	"run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0"		\
 	"init_net=run args_all args_net\0"				\
@@ -270,7 +270,8 @@
 		"sf write ${loadaddr} 0 ${filesize}\0"		\
 	"burn_uboot_nand=nand erase 0 0x100000; "			\
 		"nand write ${loadaddr} 0 ${filesize}\0"		\
-	"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0"	\
+	"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 "	\
+		KERNEL_MTD_PARTS					\
 	"args_net=setenv bootargs ${bootargs} rootfstype=nfs "		\
 		"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"	\
 		"${nfs_options} ip=dhcp\0"				\
@@ -293,8 +294,8 @@
 
 #ifndef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND						\
-	"run init_${boot} init_fw_rd_${boot} get_fdt_${boot} "		\
-		"get_mon_${boot} get_kern_${boot} run_mon run_kern"
+	"run init_${boot} get_mon_${boot} run_mon init_fw_rd_${boot} "	\
+	"get_fdt_${boot} get_kern_${boot} run_kern"
 #endif
 
 #define CONFIG_BOOTARGS							\
@@ -302,27 +303,13 @@
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
 
-/* We wont be loading up OS from SPL for now.. */
-#undef CONFIG_SPL_OS_BOOT
-
-/* We do not have MMC support.. yet.. */
-#undef CONFIG_SPL_LIBDISK_SUPPORT
-#undef CONFIG_SPL_MMC_SUPPORT
-#undef CONFIG_SPL_FAT_SUPPORT
-#undef CONFIG_SPL_EXT_SUPPORT
-#undef CONFIG_MMC
-#undef CONFIG_GENERIC_MMC
-
-/* And no support for GPIO, yet.. */
-#undef CONFIG_SPL_GPIO_SUPPORT
-
 /* we may include files below only after all above definitions */
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
 #ifndef CONFIG_SOC_K2G
-#define CONFIG_SYS_HZ_CLOCK		clk_get_rate(KS2_CLK1_6)
+#define CONFIG_SYS_HZ_CLOCK		ks_clk_get_rate(KS2_CLK1_6)
 #else
-#define CONFIG_SYS_HZ_CLOCK		external_clk[sys_clk]
+#define CONFIG_SYS_HZ_CLOCK		get_external_clk(sys_clk)
 #endif
 
 #endif /* __CONFIG_KS2_EVM_H */