X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_keystone2.h;h=3fadef7a0afa0368d3bf9dcebe24ffe4d5bb0434;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=5d4ef58e5f1a369c8b756605403a6a53dc0fd288;hpb=f1cc97764be4383d2aeb56d5ba5415439a1d5c97;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 5d4ef58..3fadef7 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -28,7 +28,6 @@
 #define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_LPAE_SDRAM_BASE	0x800000000
 #define CONFIG_MAX_RAM_BANK_SIZE	(2 << 30)       /* 2GB */
-#define CONFIG_STACKSIZE		(512 << 10)     /* 512 KiB */
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SPL_TEXT_BASE - \
 					GENERATED_GBL_DATA_SIZE)
 
@@ -55,6 +54,13 @@
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 
+/* SRAM scratch space entries  */
+#define SRAM_SCRATCH_SPACE_ADDR	CONFIG_SPL_STACK + 0x8
+
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START	(SRAM_SCRATCH_SPACE_ADDR)
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_END	(SRAM_SCRATCH_SPACE_ADDR + 0x200)
+#define KEYSTONE_SRAM_SCRATCH_SPACE_END		(TI_SRAM_SCRATCH_BOARD_EEPROM_END)
+
 /* UART Configuration */
 #define CONFIG_SYS_NS16550_MEM32
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
@@ -179,12 +185,7 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_MAX_CHIPS		1
 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#define CONFIG_ENV_SIZE				(256 << 10)  /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET			0x100000
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define MTDIDS_DEFAULT			"nand0=davinci_nand.0"
 #define MTDPARTS_DEFAULT		"mtdparts=davinci_nand.0:" \
 					"1024k(bootloader)ro,512k(params)ro," \
@@ -193,7 +194,6 @@
 /* USB Configuration */
 #define CONFIG_USB_XHCI_KEYSTONE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
-#define CONFIG_FS_FAT
 #define CONFIG_USB_SS_BASE			KS2_USB_SS_BASE
 #define CONFIG_USB_HOST_XHCI_BASE		KS2_USB_HOST_XHCI_BASE
 #define CONFIG_DEV_USB_PHY_BASE			KS2_DEV_USB_PHY_BASE
@@ -201,18 +201,19 @@
 
 /* U-Boot command configuration */
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_EEPROM
 
 /* U-Boot general configuration */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 #define CONFIG_TIMESTAMP
 
 /* EDMA3 */
 #define CONFIG_TI_EDMA3
 
+#define KERNEL_MTD_PARTS						\
+	"mtdparts="							\
+	SPI_MTD_PARTS
+
 #define DEFAULT_FW_INITRAMFS_BOOT_ENV					\
 	"name_fw_rd=k2-fw-initrd.cpio.gz\0"				\
 	"set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0"		\
@@ -269,7 +270,8 @@
 		"sf write ${loadaddr} 0 ${filesize}\0"		\
 	"burn_uboot_nand=nand erase 0 0x100000; "			\
 		"nand write ${loadaddr} 0 ${filesize}\0"		\
-	"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0"	\
+	"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 "	\
+		KERNEL_MTD_PARTS					\
 	"args_net=setenv bootargs ${bootargs} rootfstype=nfs "		\
 		"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"	\
 		"${nfs_options} ip=dhcp\0"				\
@@ -307,7 +309,7 @@
 #ifndef CONFIG_SOC_K2G
 #define CONFIG_SYS_HZ_CLOCK		ks_clk_get_rate(KS2_CLK1_6)
 #else
-#define CONFIG_SYS_HZ_CLOCK		external_clk[sys_clk]
+#define CONFIG_SYS_HZ_CLOCK		get_external_clk(sys_clk)
 #endif
 
 #endif /* __CONFIG_KS2_EVM_H */