X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_keystone2.h;h=0c7d664868320808c0e6c2deffe9e6e5164400b2;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=2fe8d9dde0f8216a6c13460b692f712c78c233dc;hpb=d021e942107a1f7304a879cec99286ca462f7be3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 2fe8d9d..0c7d664 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common configuration header file for all Keystone II EVM platforms
  *
  * (C) Copyright 2012-2014
  *     Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #ifndef __CONFIG_KS2_EVM_H
@@ -17,12 +16,10 @@
 
 /* SoC Configuration */
 #define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_ARCH_TIMER
 #define CONFIG_SPL_TARGET		"u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF
 
 /* Memory Configuration */
-#define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_LPAE_SDRAM_BASE	0x800000000
 #define CONFIG_MAX_RAM_BANK_SIZE	(2 << 30)       /* 2GB */
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SPL_TEXT_BASE - \
@@ -48,7 +45,6 @@
 					CONFIG_SYS_SPL_MALLOC_SIZE + \
 					SPL_MALLOC_F_SIZE + \
 					KEYSTONE_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 
 /* SRAM scratch space entries  */
@@ -66,7 +62,6 @@
 #endif
 #define CONFIG_SYS_NS16550_COM1		KS2_UART0_BASE
 #define CONFIG_SYS_NS16550_COM2		KS2_UART1_BASE
-#define CONFIG_CONS_INDEX		1
 
 #ifndef CONFIG_SOC_K2G
 #define CONFIG_SYS_NS16550_CLK		ks_clk_get_rate(KS2_CLK1_6)
@@ -93,8 +88,6 @@
 #endif
 
 /* Network Configuration */
-#define CONFIG_PHY_MARVELL
-#define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
@@ -135,7 +128,6 @@
 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE	KS2_NETCP_PDMA_TX_SND_QUEUE
 
 /* Keystone net */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
 #define CONFIG_KSNET_MAC_ID_BASE		KS2_MAC_ID_BASE_ADDR
 #define CONFIG_KSNET_NETCP_BASE			KS2_NETCP_BASE
 #define CONFIG_KSNET_SERDES_SGMII_BASE		KS2_SGMII_SERDES_BASE
@@ -148,7 +140,6 @@
 #define CONFIG_AEMIF_CNTRL_BASE		KS2_AEMIF_CNTRL_BASE
 
 /* I2C Configuration */
-#define CONFIG_SYS_I2C_DAVINCI
 #define CONFIG_SYS_DAVINCI_I2C_SPEED	100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE	0x10 /* SMBus host address */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED1	100000
@@ -164,7 +155,6 @@
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 
 /* NAND Configuration */
-#define CONFIG_NAND_DAVINCI
 #define CONFIG_KEYSTONE_RBL_NAND
 #define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE	CONFIG_ENV_OFFSET
 #define CONFIG_SYS_NAND_MASK_CLE		0x4000
@@ -178,17 +168,19 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_MAX_CHIPS		1
 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#define CONFIG_MTD_PARTITIONS
 
-/* USB Configuration */
-#define CONFIG_USB_XHCI_KEYSTONE
-#define CONFIG_USB_SS_BASE			KS2_USB_SS_BASE
-#define CONFIG_USB_HOST_XHCI_BASE		KS2_USB_HOST_XHCI_BASE
-#define CONFIG_DEV_USB_PHY_BASE			KS2_DEV_USB_PHY_BASE
-#define CONFIG_USB_PHY_CFG_BASE			KS2_USB_PHY_CFG_BASE
+#define DFU_ALT_INFO_MMC \
+	"dfu_alt_info_mmc=" \
+	"MLO fat 0 1;" \
+	"u-boot.img fat 0 1;" \
+	"uEnv.txt fat 0 1\0"
+
+/* DFU settings */
+#define DFUARGS \
+	"dfu_bufsiz=0x10000\0" \
+	DFU_ALT_INFO_MMC \
 
 /* U-Boot general configuration */
-#define CONFIG_MISC_INIT_R
 #define CONFIG_MX_CYCLIC
 #define CONFIG_TIMESTAMP
 
@@ -226,6 +218,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_LINUX_BOOT_ENV						\
 	CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
+	DFUARGS								\
 	"bootdir=/boot\0" \
 	"tftp_root=/\0"							\
 	"nfs_root=/export\0"						\