X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_keystone2.h;h=0c7d664868320808c0e6c2deffe9e6e5164400b2;hb=29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a;hp=ac8dabd9caebb7db2f5f046dbf6d188e887463ec;hpb=5cafcbab580bac6c7f44ca4a164c422b7e1ecf20;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index ac8dabd..0c7d664 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common configuration header file for all Keystone II EVM platforms
  *
  * (C) Copyright 2012-2014
  *     Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #ifndef __CONFIG_KS2_EVM_H
@@ -17,15 +16,10 @@
 
 /* SoC Configuration */
 #define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_ARCH_TIMER
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE		0x0c000000
-#endif
 #define CONFIG_SPL_TARGET		"u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF
 
 /* Memory Configuration */
-#define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_LPAE_SDRAM_BASE	0x800000000
 #define CONFIG_MAX_RAM_BANK_SIZE	(2 << 30)       /* 2GB */
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SPL_TEXT_BASE - \
@@ -51,7 +45,6 @@
 					CONFIG_SYS_SPL_MALLOC_SIZE + \
 					SPL_MALLOC_F_SIZE + \
 					KEYSTONE_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 
 /* SRAM scratch space entries  */
@@ -69,7 +62,6 @@
 #endif
 #define CONFIG_SYS_NS16550_COM1		KS2_UART0_BASE
 #define CONFIG_SYS_NS16550_COM2		KS2_UART1_BASE
-#define CONFIG_CONS_INDEX		1
 
 #ifndef CONFIG_SOC_K2G
 #define CONFIG_SYS_NS16550_CLK		ks_clk_get_rate(KS2_CLK1_6)
@@ -78,7 +70,6 @@
 #endif
 
 /* SPI Configuration */
-#define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_CLK		ks_clk_get_rate(KS2_CLK1_6)
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
@@ -97,11 +88,7 @@
 #endif
 
 /* Network Configuration */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MARVELL
-#define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT		32
@@ -141,7 +128,6 @@
 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE	KS2_NETCP_PDMA_TX_SND_QUEUE
 
 /* Keystone net */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
 #define CONFIG_KSNET_MAC_ID_BASE		KS2_MAC_ID_BASE_ADDR
 #define CONFIG_KSNET_NETCP_BASE			KS2_NETCP_BASE
 #define CONFIG_KSNET_SERDES_SGMII_BASE		KS2_SGMII_SERDES_BASE
@@ -154,14 +140,12 @@
 #define CONFIG_AEMIF_CNTRL_BASE		KS2_AEMIF_CNTRL_BASE
 
 /* I2C Configuration */
-#define CONFIG_SYS_I2C_DAVINCI
 #define CONFIG_SYS_DAVINCI_I2C_SPEED	100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE	0x10 /* SMBus host address */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED1	100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1	0x10 /* SMBus host address */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED2	100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2	0x10 /* SMBus host address */
-#define I2C_BUS_MAX			3
 
 /* EEPROM definitions */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
@@ -171,7 +155,6 @@
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 
 /* NAND Configuration */
-#define CONFIG_NAND_DAVINCI
 #define CONFIG_KEYSTONE_RBL_NAND
 #define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE	CONFIG_ENV_OFFSET
 #define CONFIG_SYS_NAND_MASK_CLE		0x4000
@@ -185,28 +168,19 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_MAX_CHIPS		1
 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define MTDIDS_DEFAULT			"nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=davinci_nand.0:" \
-					"1024k(bootloader)ro,512k(params)ro," \
-					"-(ubifs)"
-
-/* USB Configuration */
-#define CONFIG_USB_XHCI_KEYSTONE
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_SS_BASE			KS2_USB_SS_BASE
-#define CONFIG_USB_HOST_XHCI_BASE		KS2_USB_HOST_XHCI_BASE
-#define CONFIG_DEV_USB_PHY_BASE			KS2_DEV_USB_PHY_BASE
-#define CONFIG_USB_PHY_CFG_BASE			KS2_USB_PHY_CFG_BASE
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_UBIFS
+
+#define DFU_ALT_INFO_MMC \
+	"dfu_alt_info_mmc=" \
+	"MLO fat 0 1;" \
+	"u-boot.img fat 0 1;" \
+	"uEnv.txt fat 0 1\0"
+
+/* DFU settings */
+#define DFUARGS \
+	"dfu_bufsiz=0x10000\0" \
+	DFU_ALT_INFO_MMC \
 
 /* U-Boot general configuration */
-#define CONFIG_MISC_INIT_R
 #define CONFIG_MX_CYCLIC
 #define CONFIG_TIMESTAMP
 
@@ -244,6 +218,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_LINUX_BOOT_ENV						\
 	CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
+	DFUARGS								\
 	"bootdir=/boot\0" \
 	"tftp_root=/\0"							\
 	"nfs_root=/export\0"						\
@@ -252,7 +227,11 @@
 	"addr_secdb_key=0xc000000\0"					\
 	"name_kern=zImage\0"						\
 	"addr_mon=0x87000000\0"						\
+	"addr_non_sec_mon=0x0c087fc0\0"					\
+	"addr_load_sec_bm=0x0c08c000\0"					\
 	"run_mon=mon_install ${addr_mon}\0"				\
+	"run_mon_hs=mon_install ${addr_non_sec_mon} "			\
+			"${addr_load_sec_bm}\0"				\
 	"run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0"		\
 	"init_net=run args_all args_net\0"				\
 	"init_nfs=setenv autoload no; dhcp; run args_all args_net\0"	\
@@ -266,10 +245,16 @@
 	"get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0"		\
 	"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
 	"get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0"	\
-	"get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0"		\
+	"get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0"	\
+	"get_fit_net=dhcp ${fit_loadaddr} ${tftp_root}"			\
+						"/${fit_bootfile}\0"	\
+	"get_fit_nfs=nfs ${fit_loadaddr} ${nfs_root}/boot/${fit_bootfile}\0"\
+	"get_fit_ubi=ubifsload ${fit_loadaddr} ${bootdir}/${fit_bootfile}\0"\
+	"get_fit_mmc=load mmc ${bootpart} ${fit_loadaddr} "		\
+					"${bootdir}/${fit_bootfile}\0"	\
 	"get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0"	\
 	"get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
-	"burn_uboot_spi=sf probe; sf erase 0 0x80000; "		\
+	"burn_uboot_spi=sf probe; sf erase 0 0x100000; "		\
 		"sf write ${loadaddr} 0 ${filesize}\0"		\
 	"burn_uboot_nand=nand erase 0 0x100000; "			\
 		"nand write ${loadaddr} 0 ${filesize}\0"		\
@@ -282,6 +267,8 @@
 	"get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"	\
 	"get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"	\
 	"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
+	"get_fit_ramfs=dhcp ${fit_loadaddr} ${tftp_root}"		\
+						"/${fit_bootfile}\0"	\
 	"get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0"	\
 	"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"	\
 	"get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0"	\
@@ -296,12 +283,22 @@
 		"1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
 
 #ifndef CONFIG_BOOTCOMMAND
+#ifndef CONFIG_TI_SECURE_DEVICE
 #define CONFIG_BOOTCOMMAND						\
-	"run init_${boot} get_mon_${boot} run_mon init_fw_rd_${boot} "	\
-	"get_fdt_${boot} get_kern_${boot} run_kern"
+	"run init_${boot}; "						\
+	"run get_mon_${boot} run_mon; "					\
+	"run get_kern_${boot}; "					\
+	"run init_fw_rd_${boot}; "					\
+	"run get_fdt_${boot}; "						\
+	"run run_kern"
+#else
+#define CONFIG_BOOTCOMMAND						\
+	"run run_mon_hs; "						\
+	"run init_${boot}; "						\
+	"run get_fit_${boot}; "						\
+	"bootm ${fit_loadaddr}#${name_fdt}"
+#endif
 #endif
-
-#define CONFIG_BOOTARGS							\
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>