X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_common.h;h=91e139853c6a0dd6cb5e340f39b7c4bce284d8c0;hb=432e39806805c46d583e75e8dd2f7b71cc6089c1;hp=6a94cd7bb4cba5ceafa39b917b68b7816257b3eb;hpb=035ebf85b09cf11c820ae9eec414097420741abd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 6a94cd7..91e1398 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -17,12 +17,6 @@
 #ifndef __CONFIG_TI_ARMV7_COMMON_H__
 #define __CONFIG_TI_ARMV7_COMMON_H__
 
-/*
- * We typically do not contain NOR flash.  In the cases where we do, we
- * undefine this later.
- */
-#define CONFIG_SYS_NO_FLASH
-
 /* Support both device trees and ATAGs. */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -57,74 +51,12 @@
 	"bootm_size=0x10000000\0" \
 	"boot_fdt=try\0"
 
-#define DEFAULT_MMC_TI_ARGS \
-	"mmcdev=0\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"finduuid=part uuid mmc ${bootpart} uuid\0" \
-	"args_mmc=run finduuid;setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=PARTUUID=${uuid} rw " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-		"source ${loadaddr}\0" \
-	"bootenvfile=uEnv.txt\0" \
-	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \
-	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"envboot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"echo SD/MMC found on device ${mmcdev};" \
-			"if run loadbootscript; then " \
-				"run bootscript;" \
-			"else " \
-				"if run loadbootenv; then " \
-					"echo Loaded env from ${bootenvfile};" \
-					"run importbootenv;" \
-				"fi;" \
-				"if test -n $uenvcmd; then " \
-					"echo Running uenvcmd ...;" \
-					"run uenvcmd;" \
-				"fi;" \
-			"fi;" \
-		"fi;\0" \
-	"mmcloados=run args_mmc; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdtaddr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"mmcboot=mmc dev ${mmcdev}; " \
-		"setenv devnum ${mmcdev}; " \
-		"setenv devtype mmc; " \
-		"if mmc rescan; then " \
-			"echo SD/MMC found on device ${mmcdev};" \
-			"if run loadimage; then " \
-				"if test ${boot_fit} -eq 1; then " \
-					"run loadfit; " \
-				"else " \
-					"run mmcloados;" \
-				"fi;" \
-			"fi;" \
-		"fi;\0" \
-
 #define DEFAULT_FIT_TI_ARGS \
 	"boot_fit=0\0" \
-	"fit_loadaddr=0x88000000\0" \
-	"fit_bootfile=fitImage.itb\0" \
+	"fit_loadaddr=0x87000000\0" \
+	"fit_bootfile=fitImage\0" \
 	"update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile}\0" \
-	"args_fit=setenv bootargs console=${console} \0" \
-	"loadfit=run args_fit; bootm ${loadaddr}#${fdtfile};\0" \
+	"loadfit=run args_mmc; bootm ${loadaddr}#${fdtfile};\0" \
 
 /*
  * DDR information.  If the CONFIG_NR_DRAM_BANKS is not defined,
@@ -166,9 +98,6 @@
 #define CONFIG_DM_I2C_COMPAT
 #endif
 
-/* MMC/SD IP block */
-#define CONFIG_GENERIC_MMC
-
 /* McSPI IP block */
 #define CONFIG_SPI
 
@@ -184,7 +113,6 @@
  * console baudrate of 115200 and use the default baud rate table.
  */
 #define CONFIG_SYS_MALLOC_LEN		SZ_32M
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_ENV_VARS_UBOOT_CONFIG	/* Strongly encouraged */
 #define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
 
@@ -198,9 +126,6 @@
 
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE		1024
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
-					+ sizeof(CONFIG_SYS_PROMPT) + 16)
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
@@ -211,23 +136,11 @@
  */
 #if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) || defined(CONFIG_NAND_DAVINCI)
 #define CONFIG_MTD_DEVICE		/* Required for mtdparts */
-#define CONFIG_CMD_MTDPARTS
 #endif
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
 /*
- * Common filesystems support.  When we have removable storage we
- * enabled a number of useful commands and support.
- */
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-#endif
-
-/*
  * Our platforms make use of SPL to initalize the hardware (primarily
  * memory) enough for full U-Boot to be loaded. We make use of the general
  * SPL framework found under common/spl/.  Given our generally common memory
@@ -282,18 +195,12 @@
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
 
 /* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
-
-/* spl export command */
-#define CONFIG_CMD_SPL
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x1700  /* address 0x2E0000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x1500  /* address 0x2A0000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x200   /* 256KiB */
 #endif
 
-#define CONFIG_SYS_THUMB_BUILD
-
 /* General parts of the framework, required. */
-#define CONFIG_SPL_BOARD_INIT
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_BASE