X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_armv7_common.h;h=32cb20273ab7096061946d5bff42eb8f9b1a5bf1;hb=9dd1d0aa4e086bc8a5eaf19a67825c3323c41c5a;hp=3afd6d7e883591391de50a368203ebeb8b3b3e6b;hpb=88033d737d9f46e7eebda6a8f9770957eb9aae9c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 3afd6d7..32cb202 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -59,11 +59,34 @@
 #define DEFAULT_MMC_TI_ARGS \
 	"mmcdev=0\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
-	"finduuid=part uuid mmc 0:2 uuid\0" \
+	"finduuid=part uuid mmc ${bootpart} uuid\0" \
 	"args_mmc=run finduuid;setenv bootargs console=${console} " \
 		"${optargs} " \
 		"root=PARTUUID=${uuid} rw " \
-		"rootfstype=${mmcrootfstype}\0"
+		"rootfstype=${mmcrootfstype}\0" \
+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+		"source ${loadaddr}\0" \
+	"bootenvfile=uEnv.txt\0" \
+	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \
+	"envboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"if run loadbootscript; then " \
+				"run bootscript;" \
+			"else " \
+				"if run loadbootenv; then " \
+					"echo Loaded env from ${bootenvfile};" \
+					"run importbootenv;" \
+				"fi;" \
+				"if test -n $uenvcmd; then " \
+					"echo Running uenvcmd ...;" \
+					"run uenvcmd;" \
+				"fi;" \
+			"fi;" \
+		"fi;\0" \
 
 /*
  * DDR information.  If the CONFIG_NR_DRAM_BANKS is not defined,
@@ -85,19 +108,32 @@
 /* Timer information. */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 
+/*
+ * Disable DM_* for SPL build and can be re-enabled after adding
+ * DM support in SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_I2C
+#endif
+
 /* I2C IP block */
 #define CONFIG_I2C
-#define CONFIG_CMD_I2C
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#else
+/*
+ * Enable CONFIG_DM_I2C_COMPAT temporarily until all the i2c client
+ * devices are adopted to DM
+ */
+#define CONFIG_DM_I2C_COMPAT
+#endif
 
 /* MMC/SD IP block */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_MMC
 
 /* McSPI IP block */
 #define CONFIG_SPI
-#define CONFIG_CMD_SPI
 
 /* GPIO block */
 
@@ -115,7 +151,6 @@
 #else
 #define CONFIG_SYS_MALLOC_LEN	(16 << 20)
 #endif
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_ENV_VARS_UBOOT_CONFIG	/* Strongly encouraged */
@@ -125,7 +160,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS		64
@@ -148,8 +182,6 @@
 #define CONFIG_CMD_MTDPARTS
 #endif
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_SUPPORT_RAW_INITRD
 
 /*
@@ -158,11 +190,7 @@
  */
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
 #endif
@@ -183,14 +211,14 @@
 /*
  * Place the image at the start of the ROM defined image space (per
  * CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined
- * downloaded image area.  We initalize DRAM as soon as we can so that
- * we can place stack, malloc and BSS there.  We load U-Boot itself into
- * memory at 0x80800000 for legacy reasons (to not conflict with older
- * SPLs).  We have our BSS be placed 2MiB after this, to allow for the
- * default Linux kernel address of 0x80008000 to work with most sized
- * kernels, in the Falcon Mode case.  We have the SPL malloc pool at the
- * end of the BSS area.  We suggest that the stack be placed at 32MiB after
- * the start of DRAM to allow room for all of the above (handled in Kconfig).
+ * downloaded image area minus 1KiB for scratch space.  We initalize DRAM as
+ * soon as we can so that we can place stack, malloc and BSS there.  We load
+ * U-Boot itself into memory at 0x80800000 for legacy reasons (to not conflict
+ * with older SPLs).  We have our BSS be placed 2MiB after this, to allow for
+ * the default Linux kernel address of 0x80008000 to work with most sized
+ * kernels, in the Falcon Mode case.  We have the SPL malloc pool at the end
+ * of the BSS area.  We suggest that the stack be placed at 32MiB after the
+ * start of DRAM to allow room for all of the above (handled in Kconfig).
  */
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x80800000
@@ -204,6 +232,11 @@
 					 CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 #endif
+#ifndef CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
+#endif
+
 
 /* RAW SD card / eMMC locations. */
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
@@ -282,6 +315,5 @@
 #endif
 
 #include <config_distro_defaults.h>
-#define CONFIG_CMD_EXT4_WRITE
 
 #endif	/* __CONFIG_TI_ARMV7_COMMON_H__ */