X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_am335x_common.h;h=bf44121a0fe6f5331b9504dbe1af77e8c9c684ab;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=edbd8205495ee7f5ca723b0b5ebf331256ebdcc3;hpb=a85670e40da1ef4f299effb73c36e48d39d50106;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index edbd820..bf44121 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -12,9 +12,7 @@
 #ifndef __CONFIG_TI_AM335X_COMMON_H__
 #define __CONFIG_TI_AM335X_COMMON_H__
 
-#define CONFIG_AM33XX
 #define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_CACHELINE_SIZE       64
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
@@ -24,23 +22,24 @@
 /* NS16550 Configuration */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #endif
+#endif
 #define CONFIG_SYS_NS16550_CLK		48000000
 
+#ifndef CONFIG_SPL_BUILD
 /* Network defines. */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
 #define CONFIG_MII			/* Required in net/eth.c */
+#endif
 
+#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
 /*
  * RTC related defines. To use bootcount you must set bootlimit in the
  * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
@@ -48,10 +47,6 @@
  */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
 
-/* Enable the HW watchdog, since we can use this with bootcount */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_OMAP_WATCHDOG
-
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
@@ -59,13 +54,11 @@
  * supports X-MODEM loading via UART, and we leverage this and then use
  * Y-MODEM to load u-boot.img, when booted over UART.
  */
-#define CONFIG_SPL_TEXT_BASE		0x402F0400
-#define CONFIG_SPL_MAX_SIZE		(0x4030B800 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_TEXT_BASE		CONFIG_ISW_ENTRY_ADDR
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 
 /* Enable the watchdog inside of SPL */
-#define CONFIG_SPL_WATCHDOG_SUPPORT
 
 /*
  * Since SPL did pll and ddr initialization for us,
@@ -80,9 +73,6 @@
  * we need to call board_early_init_f.  This is taken care of in
  * s_init when we have SPL used.
  */
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
-#define CONFIG_BOARD_EARLY_INIT_F
-#endif
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */