X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_am335x_common.h;h=0b9930e884ee68e3e90cfecaddeb6b0894f2c980;hb=f89d6133eef2e068f9c33853b6584d7fcbfa9d2e;hp=d841b3f7b622b42545385d1be0de50556fd6faa5;hpb=51b4a639e45bfb592d7019b4e2a8cc72ad206c9b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index d841b3f..0b9930e 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * ti_am335x_common.h
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
  *
- * SPDX-License-Identifier:	GPL-2.0+
- *
  * For more details, please see the technical documents listed at
  * http://www.ti.com/product/am3359#technicaldocuments
  */
@@ -15,40 +14,25 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
-#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #include <asm/arch/omap.h>
 
 /* NS16550 Configuration */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #endif
+#endif
 #define CONFIG_SYS_NS16550_CLK		48000000
 
 #ifndef CONFIG_SPL_BUILD
 /* Network defines. */
-#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_MII			/* Required in net/eth.c */
 #endif
 
-#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
-/*
- * RTC related defines. To use bootcount you must set bootlimit in the
- * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
- * in the board config.
- */
-#define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
-
-/* Enable the HW watchdog, since we can use this with bootcount */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_OMAP_WATCHDOG
-
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
@@ -56,7 +40,6 @@
  * supports X-MODEM loading via UART, and we leverage this and then use
  * Y-MODEM to load u-boot.img, when booted over UART.
  */
-#define CONFIG_SPL_TEXT_BASE		0x402F0400
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 
@@ -75,13 +58,6 @@
  * we need to call board_early_init_f.  This is taken care of in
  * s_init when we have SPL used.
  */
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
-#define CONFIG_BOARD_EARLY_INIT_F
-#endif
-
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#endif
 
 /* Now bring in the rest of the common code. */
 #include <configs/ti_armv7_omap.h>