X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti816x_evm.h;h=fa5d91099e1a92ebe280f2a4c172c913c91fb901;hb=06ddcfc95a0eb1cf17c1436bfeb3cc4d056fdb3a;hp=77ed37c6f32e27574c29125ca942e009083d4b77;hpb=248a3f6c7ce01965f0303416645c8884013acabb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 77ed37c..fa5d910 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * ti816x_evm.h
  *
  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
  * Antoine Tenart, <atenart@adeneo-embedded.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_TI816X_EVM_H
@@ -13,34 +12,22 @@
 #include <configs/ti_armv7_omap.h>
 #include <asm/arch/omap.h>
 
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_MACH_TYPE		MACH_TYPE_TI8168EVM
-
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	DEFAULT_LINUX_BOOT_ENV \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-
-#define CONFIG_BOOTCOMMAND			\
-	"mmc rescan;"				\
-	"fatload mmc 0 ${loadaddr} uImage;"	\
-	"bootm ${loadaddr}"			\
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 
 /* Clock Defines */
 #define V_OSCK          24000000    /* Clock output from T2 */
 #define V_SCLK          (V_OSCK >> 1)
 
-#define CONFIG_CMD_ASKENV
-
 #define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2048MB */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
 /**
  * Platform/Board specific defs
  */
-#define CONFIG_SYS_CLK_FREQ     27000000
 #define CONFIG_SYS_TIMERBASE    0x4802E000
-#define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
 
 /*
  * NS16550 Configuration
@@ -51,12 +38,7 @@
 #define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
 
 /* allow overwriting serial config and ethaddr */
-#define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_SERIAL1
-#define CONFIG_SERIAL2
-#define CONFIG_SERIAL3
-#define CONFIG_CONS_INDEX	1
 
 /*
  * GPMC NAND block.  We support 1 device and the physical address to
@@ -66,20 +48,9 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 /* NAND: SPL related configs */
-#define CONFIG_SPL_NAND_AM33XX_BCH
 
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
@@ -90,57 +61,8 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define MTDIDS_DEFAULT			"nand0=nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=nand.0:" \
-					"128k(NAND.SPL)," \
-					"128k(NAND.SPL.backup1)," \
-					"128k(NAND.SPL.backup2)," \
-					"128k(NAND.SPL.backup3)," \
-					"256k(NAND.u-boot-spl-os)," \
-					"1m(NAND.u-boot)," \
-					"128k(NAND.u-boot-env)," \
-					"128k(NAND.u-boot-env.backup1)," \
-					"8m(NAND.kernel)," \
-					"-(NAND.file-system)"
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
-#define CONFIG_ENV_OFFSET		0x001c0000
-#define CONFIG_ENV_OFFSET_REDUND	0x001e0000
-#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#define CONFIG_SPL_TEXT_BASE    0x40400000
-#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
-					 CONFIG_SPL_TEXT_BASE)
-
-#define CONFIG_SYS_TEXT_BASE        0x80800000
-
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT	10
 
-/* Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#undef CONFIG_DM_USB
-#endif
 #endif