X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fti816x_evm.h;h=7ca749a568b11bb2cec20ad9ab90b433024382b4;hb=e91907a1464e5b79673c37f46dcb76d3c5b7c0c7;hp=68eb08f8126f466ee474424ecc799568d34f8a41;hpb=5cafcbab580bac6c7f44ca4a164c422b7e1ecf20;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 68eb08f..7ca749a 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -1,80 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * ti816x_evm.h * * Copyright (C) 2013, Adeneo Embedded * Antoine Tenart, - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_TI816X_EVM_H #define __CONFIG_TI816X_EVM_H -#define CONFIG_TI81XX -#define CONFIG_TI816X - -#define CONFIG_ARCH_CPU_INIT - +#include #include -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024)) -#define CONFIG_SYS_LONGHELP /* undef save memory */ #define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG /* required for ramdisk support */ - #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x81000000\0" \ + DEFAULT_LINUX_BOOT_ENV \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ #define CONFIG_BOOTCOMMAND \ "mmc rescan;" \ "fatload mmc 0 ${loadaddr} uImage;" \ "bootm ${loadaddr}" \ -#define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk" - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */ - -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - -#define CONFIG_CMD_ASKENV - -/* - * Only one of the following two options (DDR3/DDR2) should be enabled - * CONFIG_TI816X_EVM_DDR2 - * CONFIG_TI816X_EVM_DDR3 - */ -#define CONFIG_TI816X_EVM_DDR3 - -/* - * Supported values: 400, 531, 675 or 796 MHz - */ -#define CONFIG_TI816X_DDR_PLL_796 - -#define CONFIG_TI816X_USE_EMIF0 1 -#define CONFIG_TI816X_USE_EMIF1 1 - -#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ -#define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */ -#define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */ -#define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */ - #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_SDRAM_BASE 0x80000000 /** * Platform/Board specific defs @@ -83,8 +38,6 @@ #define CONFIG_SYS_TIMERBASE 0x4802E000 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#undef CONFIG_NAND_OMAP_GPMC - /* * NS16550 Configuration */ @@ -94,35 +47,48 @@ #define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ /* allow overwriting serial config and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SERIAL1 -#define CONFIG_SERIAL2 -#define CONFIG_SERIAL3 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_ENV_IS_NOWHERE +/* + * GPMC NAND block. We support 1 device and the physical address to + * access CS0 at is 0x8000000. + */ +#define CONFIG_SYS_NAND_BASE 0x8000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* NAND: SPL related configs */ + +/* NAND: device related configs */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +/* NAND: driver related configs */ +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 +#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40400000 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - -#define CONFIG_SYS_TEXT_BASE 0x80800000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 /* Since SPL did pll and ddr initialization for us, * we don't need to do it twice. @@ -131,4 +97,12 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif +/* + * Disable MMC DM for SPL build and can be re-enabled after adding + * DM support in SPL + */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_DM_MMC +#undef CONFIG_TIMER +#endif #endif