X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fthuban.h;h=1753fa410d18bf77378777b7bea272caaade4b45;hb=0613c36a7a5973d58a50b764ee647099e80cc97d;hp=88dce5472ad42cfd5cdc7e79e4cad0d9d8a89d2e;hpb=ebca902aeb3af3eaedd2787928184ad84a86b98f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/thuban.h b/include/configs/thuban.h
index 88dce54..1753fa4 100644
--- a/include/configs/thuban.h
+++ b/include/configs/thuban.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 Siemens Schweiz AG
  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -6,8 +7,6 @@
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_THUBAN_H
@@ -20,7 +19,7 @@
 #define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
 #define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
 
-#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
 	"button_dfu0=27\0" \
 	"led0=103,1,0\0" \
 	"led1=64,0,1\0"
@@ -28,56 +27,18 @@
  /* Physical Memory Map */
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED		100000
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 #define EEPROM_ADDR_DDR3 0x90
 #define EEPROM_ADDR_CHIP 0x120
 
-#undef CONFIG_MII
-#define CONFIG_PHY_SMSC
-
-#define CONFIG_FACTORYSET
-
-/* Define own nand partitions */
-#define CONFIG_ENV_OFFSET_REDUND    0x2E0000
-#define CONFIG_ENV_SIZE_REDUND      0x2000
-#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
-#ifndef CONFIG_SPL_BUILD
-
 /* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	"hostname=thuban\0" \
 	"ubi_off=2048\0"\
 	"nand_img_size=0x400000\0" \
 	"optargs=\0" \
 	"preboot=draco_led 0\0" \
-	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
-	CONFIG_ENV_SETTINGS_V2 \
-	CONFIG_ENV_SETTINGS_NAND_V2
-
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-"if dfubutton; then " \
-	"run dfu_start; " \
-	"reset; " \
-"fi;" \
-"run nand_boot;" \
-"run nand_boot_backup;" \
-"reset;"
-
-#else
+	CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+	CFG_ENV_SETTINGS_V2 \
+	CFG_ENV_SETTINGS_NAND_V2
 
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-#endif	/* CONFIG_SPL_BUILD */
 #endif	/* ! __CONFIG_THUBAN_H */