X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftheadorable.h;h=94e207c8c4b243d1bfd7a85190630ea4f44f724f;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=dda70c5c818fcf1b83c2f4647baff5c46de285b9;hpb=08ca213acadef61748dc62d48b0f5c4bed8b8c2d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index dda70c5..94e207c 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -23,8 +23,6 @@
 /*
  * Commands configuration
  */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_SATA
 
 /*
  * The debugging version enables USB support via defconfig.
@@ -47,8 +45,6 @@
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 
-#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-
 /* SPI NOR flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_SPEED		27777777 /* for fast SPL booting */
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
@@ -63,8 +59,6 @@
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_PREBOOT
 
@@ -78,8 +72,6 @@
 #define CONFIG_SATA_MV
 #define CONFIG_LIBATA
 #define CONFIG_LBA48
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
 
 /* Additional FS support/configuration */
 #define CONFIG_SUPPORT_VFAT
@@ -87,21 +79,13 @@
 /* PCIe support */
 #ifdef CONFIG_CMD_PCI
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI
 #define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_PNP
-#define CONFIG_BOARD_LATE_INIT		/* for PEX switch test */
 #endif
 #endif
 
 /* Enable LCD and reserve 512KB from top of memory*/
 #define CONFIG_SYS_MEM_TOP_HIDE		0x80000
 
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_CMD_BMP
-
 /* FPGA programming support */
 #define CONFIG_FPGA
 #define CONFIG_FPGA_ALTERA
@@ -150,17 +134,8 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS		0
-#define CONFIG_SPL_SPI_CS		0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x1a000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS