X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftbs2910.h;h=fcc9674942209996b87c45299d9e1e8e066d9689;hb=0ea156ba00f34b3b9c8735d25c8ec7b8dffffb45;hp=0438b5ae0c6d3dfb6911c19f50a9974ee84eb267;hpb=6674edaabfd271471608146806f5b6540bc76a1b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 0438b5a..fcc9674 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -12,54 +12,27 @@
 
 /* General configuration */
 
-#define CONFIG_SYS_HZ			1000
-
 /* Physical Memory Map */
-#define CONFIG_SYS_SDRAM_BASE		MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_BOOTMAPSZ		0x10000000
+#define CFG_SYS_SDRAM_BASE		MMDC0_ARB_BASE_ADDR
 
-/* Serial console */
-#define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
+#define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-/* Framebuffer */
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
+#define CFG_SYS_BOOTMAPSZ		0x10000000
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #endif
 
-/* SATA */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#define CONFIG_SYS_64BIT_LBA
-#endif
-
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 #endif /* CONFIG_CMD_USB      */
 
-#define CONFIG_BOARD_SIZE_LIMIT		392192 /* (CONFIG_ENV_OFFSET - 1024) */
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
@@ -84,10 +57,6 @@
 	"pxefile_addr_r=0x10100000\0" \
 	"ramdisk_addr_r=0x18080000\0" \
 	"scriptaddr=0x10000000\0" \
-	"set_con_serial=setenv stdout serial; " \
-			"setenv stderr serial\0" \
-	"set_con_hdmi=setenv stdout serial,vidconsole; " \
-			"setenv stderr serial,vidconsole\0" \
 	"stderr=serial,vidconsole\0" \
 	"stdin=serial,usbkbd\0" \
 	"stdout=serial,vidconsole\0"