X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftbs2910.h;h=a753d41835485e3ffa9749163d3d2fc9460c4b38;hb=4862830b696a6d0750e19d32a82553cdb41a85f8;hp=0dc4a28a4308b848b31b9b5c8ce39c83c917419a;hpb=30aaa774df39971e0f488b7661c8825a45570cd2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 0dc4a28..a753d41 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
  *
  * Configuration settings for the TBS2910 MatrixARM board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __TBS2910_CONFIG_H
@@ -12,18 +11,14 @@
 #include "mx6_common.h"
 
 /* General configuration */
-#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_MACH_TYPE		3980
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_HZ			1000
 
 #define CONFIG_IMX_THERMAL
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -44,46 +39,24 @@
 /* Serial console */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_CONS_INDEX		1
-
-/* *** Command definition *** */
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_PART
-
-/* Filesystems / image support */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-
-/* MMC */
-#define CONFIG_SYS_FSL_USDHC_NUM	3
-#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		4
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
 #ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_IPUV3_CLK		260000000
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_CMD_HDMIDETECT
 #endif
 
 /* PCI */
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
@@ -91,65 +64,41 @@
 #endif
 
 /* SATA */
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
+#define CONFIG_SYS_64BIT_LBA
 #endif
 
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 #ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 #define CONFIG_PREBOOT \
 	"usb start; " \
 	"if hdmidet; then " \
 		"run set_con_hdmi; " \
 	"else " \
 		"run set_con_serial; " \
-	"fi;"
+	"fi"
 #endif /* CONFIG_USB_KEYBOARD */
 #endif /* CONFIG_CMD_USB      */
 
-/* RTC */
-#define CONFIG_CMD_DATE
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_RTC_BUS_NUM		2
-#endif
-
-/* I2C */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_I2C_EDID
-#endif
-
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		2 /* overwritten on SD boot */
 #define CONFIG_SYS_MMC_ENV_PART		1 /* overwritten on SD boot */
 #define CONFIG_ENV_SIZE			(8 * 1024)
 #define CONFIG_ENV_OFFSET		(384 * 1024)
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_BOARD_SIZE_LIMIT		392192 /* (CONFIG_ENV_OFFSET - 1024) */
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 	"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
@@ -168,12 +117,12 @@
 	"console=ttymxc0\0" \
 	"fan=gpio set 92\0" \
 	"set_con_serial=setenv stdout serial; " \
-			"setenv stderr serial;\0" \
+			"setenv stderr serial\0" \
 	"set_con_hdmi=setenv stdout serial,vga; " \
-			"setenv stderr serial,vga;\0" \
-	"stderr=serial,vga;\0" \
-	"stdin=serial,usbkbd;\0" \
-	"stdout=serial,vga;\0"
+			"setenv stderr serial,vga\0" \
+	"stderr=serial,vga\0" \
+	"stdin=serial,usbkbd\0" \
+	"stdout=serial,vga\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc rescan; " \