X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftbs2910.h;h=a60223c62354a28769ebaa9edbd72119ea0f5d3c;hb=0223462b373b975d970fa86e5e1a7eadd1d41820;hp=85501bca0ff76a6db3966bb80e264e530506a981;hpb=12f05678e157ef4472b4e3611bb7ae9751487ff0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 85501bc..a60223c 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
  *
  * Configuration settings for the TBS2910 MatrixARM board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __TBS2910_CONFIG_H
@@ -12,18 +11,14 @@
 #include "mx6_common.h"
 
 /* General configuration */
-#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_MACH_TYPE		3980
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_HZ			1000
 
 #define CONFIG_IMX_THERMAL
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -39,26 +34,13 @@
 #define CONFIG_SYS_MEMTEST_END \
 	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_BOOTMAPSZ		0x6C000000
+#define CONFIG_SYS_BOOTMAPSZ		0x10000000
 
 /* Serial console */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_CONS_INDEX		1
-
-#define CONFIG_PRE_CONSOLE_BUFFER
-#define CONFIG_PRE_CON_BUF_SZ		4096
-#define CONFIG_PRE_CON_BUF_ADDR		0x7C000000
-
-/* *** Command definition *** */
-#define CONFIG_CMD_BMODE
 
 /* Filesystems / image support */
-#define CONFIG_EFI_PARTITION
 
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM	3
@@ -68,65 +50,44 @@
 /* Ethernet */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		4
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_IPUV3_CLK		260000000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_CMD_HDMIDETECT
 #endif
 
 /* PCI */
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #endif
 
 /* SATA */
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_PREBOOT \
 	"usb start; " \
 	"if hdmidet; then " \
@@ -138,7 +99,6 @@
 #endif /* CONFIG_CMD_USB      */
 
 /* RTC */
-#define CONFIG_CMD_DATE
 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1307
 #define CONFIG_SYS_RTC_BUS_NUM		2
@@ -156,7 +116,6 @@
 #endif
 
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		2 /* overwritten on SD boot */
 #define CONFIG_SYS_MMC_ENV_PART		1 /* overwritten on SD boot */
 #define CONFIG_ENV_SIZE			(8 * 1024)