X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftbs2910.h;h=79f6b162f7fbe9e3c2b13d3a28a9501736eb5ba2;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=0f230346908f59d172705a4e6fb2c9feb2181e6d;hpb=a668436051e497da18ab79ad26649e26d8a08433;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 0f23034..79f6b16 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -12,12 +12,9 @@
 #include "mx6_common.h"
 
 /* General configuration */
-#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_MACH_TYPE		3980
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_HZ			1000
 
 #define CONFIG_IMX_THERMAL
@@ -39,29 +36,15 @@
 #define CONFIG_SYS_MEMTEST_END \
 	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_BOOTMAPSZ		0x6C000000
+#define CONFIG_SYS_BOOTMAPSZ		0x10000000
 
 /* Serial console */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
-#define CONFIG_BAUDRATE			115200
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
 #define CONFIG_CONS_INDEX		1
 
-#define CONFIG_PRE_CONSOLE_BUFFER
-#define CONFIG_PRE_CON_BUF_SZ		4096
-#define CONFIG_PRE_CON_BUF_ADDR		0x7C000000
-
-/* *** Command definition *** */
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_CMD_TIME
-
 /* Filesystems / image support */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FIT
 
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM	3
@@ -70,9 +53,6 @@
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -83,32 +63,23 @@
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_IPUV3_CLK		260000000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_CMD_HDMIDETECT
 #endif
 
 /* PCI */
 #define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #endif
 
 /* SATA */
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
@@ -119,35 +90,20 @@
 #endif
 
 /* USB */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_USB_MASS_STORAGE
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_G_DNL_VENDOR_NUM		0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER	"TBS"
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_PREBOOT \
+	"usb start; " \
 	"if hdmidet; then " \
-		"usb start; " \
-		"run set_con_usb_hdmi; " \
+		"run set_con_hdmi; " \
 	"else " \
 		"run set_con_serial; " \
 	"fi;"
@@ -155,15 +111,12 @@
 #endif /* CONFIG_CMD_USB      */
 
 /* RTC */
-#define CONFIG_CMD_DATE
 #ifdef CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
 #define CONFIG_RTC_DS1307
 #define CONFIG_SYS_RTC_BUS_NUM		2
 #endif
 
 /* I2C */
-#define CONFIG_CMD_I2C
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
@@ -199,12 +152,13 @@
 			"bootm 0x10800000 0x10d00000\0" \
 	"console=ttymxc0\0" \
 	"fan=gpio set 92\0" \
-	"set_con_serial=setenv stdin serial; " \
-			"setenv stdout serial; " \
+	"set_con_serial=setenv stdout serial; " \
 			"setenv stderr serial;\0" \
-	"set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
-			"setenv stdout serial,vga; " \
-			"setenv stderr serial,vga;\0"
+	"set_con_hdmi=setenv stdout serial,vga; " \
+			"setenv stderr serial,vga;\0" \
+	"stderr=serial,vga;\0" \
+	"stdin=serial,usbkbd;\0" \
+	"stdout=serial,vga;\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc rescan; " \