X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftbs2910.h;h=529dc3bafb19d36bdfddf73274b1c045b4dbc379;hb=7453cb595cc17898a8227777b410b3e34a689c37;hp=c097b98575d260f5a3e70d6d436ab8bf7ac4e4d6;hpb=2c49323d5de38e119f102fa3f5fb291c4bc4e8a0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index c097b98..529dc3b 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -10,37 +10,15 @@
 #define __TBS2910_CONFIG_H
 
 #include "mx6_common.h"
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
 
 /* General configuration */
-#define CONFIG_MX6
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 #define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_MACH_TYPE		3980
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SYS_GENERIC_BOARD
-
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
 
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"Matrix U-Boot> "
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_PBSIZE \
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_HZ			1000
 
 /* Physical Memory Map */
@@ -60,9 +38,7 @@
 #define CONFIG_SYS_MEMTEST_END \
 	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_TEXT_BASE		0x80000000
 #define CONFIG_SYS_BOOTMAPSZ		0x6C000000
-#define CONFIG_SYS_LOAD_ADDR		0x10800000
 
 /* Serial console */
 #define CONFIG_MXC_UART
@@ -74,37 +50,18 @@
 #define CONFIG_CONS_INDEX		1
 
 /* *** Command definition *** */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_IMLS
-
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_CMD_TIME
 
 /* Filesystems / image support */
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_FS_GENERIC
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_FIT
 
 /* MMC */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
@@ -163,13 +120,33 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+#ifdef CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	0
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"TBS"
+#endif /* CONFIG_CMD_USB_MASS_STORAGE */
 #define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 #define CONFIG_SYS_STDIO_DEREGISTER
-#define CONFIG_PREBOOT "if hdmidet; then usb start; fi"
+#define CONFIG_PREBOOT \
+	"if hdmidet; then " \
+		"usb start; " \
+		"run set_con_usb_hdmi; " \
+	"else " \
+		"run set_con_serial; " \
+	"fi;"
 #endif /* CONFIG_USB_KEYBOARD */
 #endif /* CONFIG_CMD_USB      */
 
@@ -186,6 +163,7 @@
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_I2C_EDID
 #endif
@@ -196,13 +174,7 @@
 #define CONFIG_MXC_OCOTP
 #endif
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
-/* Flash and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* Environment organization */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		2
 #define CONFIG_SYS_MMC_ENV_PART		1
@@ -227,9 +199,12 @@
 			"bootm 0x10800000 0x10d00000\0" \
 	"console=ttymxc0\0" \
 	"fan=gpio set 92\0" \
-	"stdin=serial,usbkbd\0" \
-	"stdout=serial,vga\0" \
-	"stderr=serial,vga\0"
+	"set_con_serial=setenv stdin serial; " \
+			"setenv stdout serial; " \
+			"setenv stderr serial;\0" \
+	"set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
+			"setenv stdout serial,vga; " \
+			"setenv stderr serial,vga;\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc rescan; " \