X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftbs2910.h;h=01c1143e43cd030e50a6cc82359ac4653c16e0ef;hb=f9a48654ee70fbad29f487d074fd36a1548b4209;hp=b06c90939cc9a59883e53bdd8bfe3b578039812c;hpb=66c433ed4342e5761ee9b048c85fe47d31130b2e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index b06c909..01c1143e 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -30,39 +30,14 @@
 
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024 * 1024)
 
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END \
-	(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
-
 #define CONFIG_SYS_BOOTMAPSZ		0x10000000
 
 /* Serial console */
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
 
-/* Filesystems / image support */
-
-/* MMC */
-#define CONFIG_SYS_FSL_USDHC_NUM	3
-#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-/* Ethernet */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		4
-#define CONFIG_PHY_ATHEROS
-
 /* Framebuffer */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#endif
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
@@ -77,54 +52,22 @@
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
+#define CONFIG_SYS_64BIT_LBA
 #endif
 
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USBD_HS
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_PREBOOT \
-	"usb start; " \
-	"if hdmidet; then " \
-		"run set_con_hdmi; " \
-	"else " \
-		"run set_con_serial; " \
-	"fi"
-#endif /* CONFIG_USB_KEYBOARD */
 #endif /* CONFIG_CMD_USB      */
 
-/* RTC */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_RTC_BUS_NUM		2
-#endif
-
-/* I2C */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_I2C_EDID
-#endif
-
-/* Environment organization */
-#define CONFIG_SYS_MMC_ENV_DEV		2 /* overwritten on SD boot */
-#define CONFIG_SYS_MMC_ENV_PART		1 /* overwritten on SD boot */
-#define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_OFFSET		(384 * 1024)
-#define CONFIG_ENV_OVERWRITE
-
 #define CONFIG_BOARD_SIZE_LIMIT		392192 /* (CONFIG_ENV_OFFSET - 1024) */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	BOOTENV \
 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 	"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 			"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
@@ -141,20 +84,28 @@
 			"bootm 0x10800000 0x10d00000\0" \
 	"console=ttymxc0\0" \
 	"fan=gpio set 92\0" \
+	"fdt_addr_r=0x18000000\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"kernel_addr_r=0x12000000\0" \
+	"pxefile_addr_r=0x10100000\0" \
+	"ramdisk_addr_r=0x18080000\0" \
+	"scriptaddr=0x10000000\0" \
 	"set_con_serial=setenv stdout serial; " \
 			"setenv stderr serial\0" \
-	"set_con_hdmi=setenv stdout serial,vga; " \
-			"setenv stderr serial,vga\0" \
-	"stderr=serial,vga\0" \
+	"set_con_hdmi=setenv stdout serial,vidconsole; " \
+			"setenv stderr serial,vidconsole\0" \
+	"stderr=serial,vidconsole\0" \
 	"stdin=serial,usbkbd\0" \
-	"stdout=serial,vga\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc rescan; " \
-	"if run bootcmd_up1; then " \
-		"run bootcmd_up2; " \
-	"else " \
-		"run bootcmd_mmc; " \
-	"fi"
+	"stdout=serial,vidconsole\0"
+
+/* Enable distro boot */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(SATA, sata, 0) \
+	func(USB, usb, 0)
+
+#include <config_distro_bootcmd.h>
 
 #endif			       /* __TBS2910_CONFIG_H * */