X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftb100.h;h=8660ed45e00ec2bfd8b889acda2d27861a9e81bd;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=46df40661da631bbabb3d629982daf6cb0f7f0f5;hpb=0dac731d1932027f4f813ec7aede35d5e30dec0e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tb100.h b/include/configs/tb100.h
index 46df406..16bdc39b 100644
--- a/include/configs/tb100.h
+++ b/include/configs/tb100.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_TB100_H_
@@ -10,46 +9,18 @@
 #include <linux/sizes.h>
 
 /*
- *  CPU configuration
- */
-#define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
-
-/*
  * Memory configuration
  */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_128M
 
-#define CONFIG_SYS_INIT_SP_ADDR		\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN		SZ_128K
-#define CONFIG_SYS_BOOTM_LEN		SZ_32M
-#define CONFIG_SYS_LOAD_ADDR		0x82000000
-
-#define CONFIG_SYS_NO_FLASH
-
 /*
  * UART configuration
  */
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_CLK		166666666
-#define CONFIG_SYS_NS16550_COM1		0xFF100000
-#define CONFIG_SYS_NS16550_MEM32
-
-#define CONFIG_BAUDRATE			115200
-
-/*
- * Ethernet PHY configuration
- */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_GIGE
 
 /*
  * Even though the board houses Realtek RTL8211E PHY
@@ -59,54 +30,17 @@
  * Until Realtek PHY driver is fixed fall back to generic PHY driver
  * which implements all required functionality and behaves much more stable.
  *
- * #define CONFIG_PHY_REALTEK
  *
  */
 
 /*
  * Ethernet configuration
  */
-#define CONFIG_DESIGNWARE_ETH
 #define ETH0_BASE_ADDRESS		0xFE100000
 #define ETH1_BASE_ADDRESS		0xFE110000
 
 /*
- * Command line configuration
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_PING
-
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_MAXARGS		16
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE			SZ_2K
-#define CONFIG_ENV_OFFSET		0
-
-/*
- * Environment configuration
- */
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_BOOTARGS			"console=ttyS0,115200n8"
-#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
-
-/*
  * Console configuration
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT		"[tb100]:~# "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-						sizeof(CONFIG_SYS_PROMPT) + 16)
 
 #endif /* _CONFIG_TB100_H_ */