X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftaurus.h;h=dbb01af43979a525139d63bd39ba97380b3f29b6;hb=bdf97b5d393fc94666a847e9bac1c358b2c63c59;hp=3112231b0b6ca5b043914ea8e8d0b12e9261b077;hpb=b25f8e2112b1582ce6386e846800a31bab688e50;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 3112231..dbb01af 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards * (C) Copyright 2013 Siemens AG @@ -8,8 +9,6 @@ * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -22,10 +21,6 @@ #include #include -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF -#endif /* * Warning: changing CONFIG_SYS_TEXT_BASE requires * adapting the initial boot program. @@ -42,6 +37,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG + #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* general purpose I/O */ @@ -49,17 +45,13 @@ #define CONFIG_AT91_GPIO #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ -/* serial console */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS - /* * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. */ -#define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M) @@ -73,7 +65,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 @@ -88,13 +79,6 @@ #define CONFIG_RMII #define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_AT91SAM9_WATCHDOG -#define CONFIG_AT91_HW_WDT_TIMEOUT 15 -#if !defined(CONFIG_SPL_BUILD) -/* Enable the watchdog */ -#define CONFIG_HW_WATCHDOG -#endif - /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL @@ -106,8 +90,6 @@ #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 /* USB DFU support */ -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS #define CONFIG_USB_GADGET_AT91 @@ -118,15 +100,10 @@ /* SPI EEPROM */ #define TAURUS_SPI_MASK (1 << 4) -#define TAURUS_SPI_CS_PIN AT91_PIN_PA3 #if defined(CONFIG_SPL_BUILD) /* SPL related */ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 - -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_SPEED 1000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 #endif /* load address */ @@ -136,8 +113,57 @@ #define CONFIG_ENV_OFFSET 0x100000 #define CONFIG_ENV_OFFSET_REDUND 0x180000 #define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#ifndef CONFIG_SPL_BUILD +#if defined(CONFIG_BOARD_AXM) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ + "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \ + "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \ + "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \ + "boot_retries=0\0" \ + "ethact=macb0\0" \ + "flash_nfs=run nand_kernel;run nfsargs;run addip;" \ + "upgrade_available;bootm ${kernel_ram};reset\0" \ + "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \ + "bootm ${kernel_ram};reset\0" \ + "flash_self_test=run nand_kernel;run setbootargs addtest;" \ + "upgrade_available;bootm ${kernel_ram};reset\0" \ + "hostname=systemone\0" \ + "kernel_Off=0x00200000\0" \ + "kernel_Off_fallback=0x03800000\0" \ + "kernel_ram=0x21500000\0" \ + "kernel_size=0x00400000\0" \ + "kernel_size_fallback=0x00400000\0" \ + "loads_echo=1\0" \ + "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \ + "${kernel_size}\0" \ + "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \ + "run nfsargs;run addip;upgrade_available;" \ + "bootm ${kernel_ram};reset\0" \ + "netdev=eth0\0" \ + "nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs " \ + "rw nfsroot=${serverip}:${rootpath} " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "partitionset_active=A\0" \ + "preboot=echo;echo Type 'run flash_self' to use kernel and root " \ + "filesystem on memory;echo Type 'run flash_nfs' to use " \ + "kernel from memory and root filesystem over NFS;echo Type " \ + "'run net_nfs' to get Kernel over TFTP and mount root " \ + "filesystem over NFS;echo\0" \ + "project_dir=systemone\0" \ + "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0" \ + "rootfs=/dev/mtdblock5\0" \ + "rootfs_fallback=/dev/mtdblock7\0" \ + "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops " \ + "root=${rootfs} rootfstype=jffs2 panic=7 " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "stderr=serial\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "upgrade_available=0\0" +#endif +#endif /* #ifndef CONFIG_SPL_BUILD */ /* * Size of malloc() pool */ @@ -145,7 +171,6 @@ ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000) /* Defines for SPL */ -#define CONFIG_SPL_TEXT_BASE 0x0 #define CONFIG_SPL_MAX_SIZE (31 * SZ_512) #define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ @@ -189,4 +214,7 @@ #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10193F05 +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + #endif