X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftaurus.h;h=4758e23f55724c7ca690646976de15c555f780d6;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=b9b9292502e1a0831024ed1c43c6fe6e317a0370;hpb=186529953fd10a97e6343418095edd1c535aaeb2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index b9b9292..4758e23 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -33,15 +33,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* main clock xtal */
 
 /* Misc CPU related */
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
 
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
@@ -58,8 +49,8 @@
  * leaving the correct space for initial global data structure above
  * that address while providing maximum stack area below.
  */
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	ATMEL_BASE_SRAM1
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -72,43 +63,20 @@
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 #endif
 
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-/* USB */
 #if defined(CONFIG_BOARD_TAURUS)
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-
 /* USB DFU support */
 
 #define CONFIG_USB_GADGET_AT91
 
 /* DFU class support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 #endif
 
 /* SPI EEPROM */
 #define TAURUS_SPI_MASK (1 << 4)
 
-#if defined(CONFIG_SPL_BUILD)
-/* SPL related */
-#endif
-
-/* load address */
-#define CONFIG_SYS_LOAD_ADDR			0x22000000
-
 /* bootstrap in spi flash , u-boot + env + linux in nandflash */
 
-#ifndef CONFIG_SPL_BUILD
 #if defined(CONFIG_BOARD_AXM)
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
@@ -157,50 +125,21 @@
 	"stdout=serial\0" \
 	"upgrade_available=0\0"
 #endif
-#endif /* #ifndef CONFIG_SPL_BUILD */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN \
-	ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE		(31 * SZ_512)
-#define	CONFIG_SPL_STACK		(ATMEL_BASE_SRAM1 + SZ_16K)
-#define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
-					CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
-
-#define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_BSS_MAX_SIZE		(3 * SZ_512)
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
-#define CONFIG_SYS_USE_NANDFLASH	1
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 #define CONFIG_SYS_NAND_SIZE		(256 * SZ_1M)
-#define CONFIG_SYS_NAND_PAGE_SIZE	SZ_2K
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(SZ_128K)
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
 					  48, 49, 50, 51, 52, 53, 54, 55, \
 					  56, 57, 58, 59, 60, 61, 62, 63, }
 
-#define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK		132096000
 #define AT91_PLL_LOCK_TIMEOUT		1000000
 #define CONFIG_SYS_AT91_PLLA		0x202A3F01
@@ -208,7 +147,4 @@
 #define CONFIG_SYS_MCKR_CSS		(0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB		0x10193F05
 
-#define CONFIG_SPL_PAD_TO		CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_SPL_LEN		CONFIG_SPL_PAD_TO
-
 #endif