X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftaurus.h;h=238074bff4c993989ea5480e6af0f1e8d465b0f4;hb=eaf6ea6a1dc10d49cdcbcad0f8b0abb6c1eb1db1;hp=3582eb2edffdcb34b64bd2bb8c312b36dce068b5;hpb=dd758c6720266c9b7bcd8d0da91a64a2fa1e181a;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 3582eb2..238074b 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -21,10 +21,6 @@ #include #include -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF -#endif /* * Warning: changing CONFIG_SYS_TEXT_BASE requires * adapting the initial boot program. @@ -37,23 +33,10 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ /* Misc CPU related */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_ATMEL_USART + #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS - /* * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. @@ -66,8 +49,8 @@ * leaving the correct space for initial global data structure above * that address while providing maximum stack area below. */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -80,11 +63,6 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 #endif -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_AT91_WANTS_COMMON_PHY - /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL @@ -100,72 +78,89 @@ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ -#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 #endif /* SPI EEPROM */ #define TAURUS_SPI_MASK (1 << 4) -#define TAURUS_SPI_CS_PIN AT91_PIN_PA3 #if defined(CONFIG_SPL_BUILD) /* SPL related */ -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #endif -/* load address */ -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - /* bootstrap in spi flash , u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET 0x100000 -#define CONFIG_ENV_OFFSET_REDUND 0x180000 -#define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000) +#ifndef CONFIG_SPL_BUILD +#if defined(CONFIG_BOARD_AXM) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ + "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \ + "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \ + "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \ + "boot_retries=0\0" \ + "ethact=macb0\0" \ + "flash_nfs=run nand_kernel;run nfsargs;run addip;" \ + "upgrade_available;bootm ${kernel_ram};reset\0" \ + "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \ + "bootm ${kernel_ram};reset\0" \ + "flash_self_test=run nand_kernel;run setbootargs addtest;" \ + "upgrade_available;bootm ${kernel_ram};reset\0" \ + "hostname=systemone\0" \ + "kernel_Off=0x00200000\0" \ + "kernel_Off_fallback=0x03800000\0" \ + "kernel_ram=0x21500000\0" \ + "kernel_size=0x00400000\0" \ + "kernel_size_fallback=0x00400000\0" \ + "loads_echo=1\0" \ + "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \ + "${kernel_size}\0" \ + "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \ + "run nfsargs;run addip;upgrade_available;" \ + "bootm ${kernel_ram};reset\0" \ + "netdev=eth0\0" \ + "nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs " \ + "rw nfsroot=${serverip}:${rootpath} " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "partitionset_active=A\0" \ + "preboot=echo;echo Type 'run flash_self' to use kernel and root " \ + "filesystem on memory;echo Type 'run flash_nfs' to use " \ + "kernel from memory and root filesystem over NFS;echo Type " \ + "'run net_nfs' to get Kernel over TFTP and mount root " \ + "filesystem over NFS;echo\0" \ + "project_dir=systemone\0" \ + "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0" \ + "rootfs=/dev/mtdblock5\0" \ + "rootfs_fallback=/dev/mtdblock7\0" \ + "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops " \ + "root=${rootfs} rootfstype=jffs2 panic=7 " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "stderr=serial\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "upgrade_available=0\0" +#endif +#endif /* #ifndef CONFIG_SPL_BUILD */ /* Defines for SPL */ -#define CONFIG_SPL_TEXT_BASE 0x0 -#define CONFIG_SPL_MAX_SIZE (31 * SZ_512) #define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SYS_USE_NANDFLASH 1 -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_SIZE (256 * SZ_1M) -#define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K -#define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 #define AT91_PLL_LOCK_TIMEOUT 1000000 #define CONFIG_SYS_AT91_PLLA 0x202A3F01 @@ -173,7 +168,6 @@ #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10193F05 -#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS #define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO #endif