X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftao3530.h;h=a3d341752c0713000682f1674719646d47d5eb9d;hb=77d2f7f5070c7def29d433096f4cee57eeddbd23;hp=c8ec79b1965568100dc96a94653fb95b11c6cac5;hpb=6f43ba70d15e15a08c25b3d956c70addb6740737;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index c8ec79b..a3d3417 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -20,7 +20,6 @@
 
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
-#define CONFIG_SYS_GENERIC_BOARD
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
@@ -45,8 +44,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_OF_LIBFDT
-
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -67,7 +64,6 @@
  */
 #define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
@@ -94,9 +90,6 @@
 #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
@@ -104,11 +97,7 @@
 					"1920k(u-boot),128k(u-boot-env),"\
 					"4m(kernel),-(fs)"
 
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -126,7 +115,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
@@ -136,9 +124,8 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 /* Environment information */
-#define CONFIG_BOOTDELAY		3
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
@@ -195,8 +182,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"TAO-3530 # "
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 
 /* turn on command-line edit/hist/auto */
@@ -281,7 +266,6 @@
  */
 
 /* USB EHCI */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	162
@@ -292,7 +276,6 @@
 
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_STORAGE
 #define CONGIG_CMD_STORAGE
 
 /* Defines for SPL */
@@ -305,18 +288,14 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
@@ -342,7 +321,8 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
 #define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 /*
  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the