X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftao3530.h;h=897966cfabf1c11789e64f758859793874290fe5;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=dafb05fa072383079a710bb714d37465f9ef65e9;hpb=f77309d34325369dbdf0bf62387c9e974f1b37da;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index dafb05f..897966c 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -16,13 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP			/* in a TI OMAP core */
-
-#define CONFIG_OMAP_GPIO
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SDRC			/* Has an SDRC controller */
 
@@ -67,17 +60,8 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_2		/* GPIO32 ..63  is in GPIO bank 2 */
-#define CONFIG_OMAP3_GPIO_3		/* GPIO64 ..95  is in GPIO bank 3 */
-#define CONFIG_OMAP3_GPIO_4		/* GPIO96 ..127 is in GPIO bank 4 */
-#define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
-#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
@@ -86,7 +70,6 @@
 
 #define CONFIG_CMD_NAND		/* NAND support			*/
 
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
@@ -96,7 +79,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER
 #define CONFIG_TWL4030_LED
 
 /*
@@ -173,7 +155,6 @@
 
 /* turn on command-line edit/hist/auto */
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
 #define CONFIG_AUTO_COMPLETE
 
 /* Print Buffer Size */
@@ -202,13 +183,6 @@
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
-
-/*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
@@ -253,8 +227,6 @@
  */
 
 /* USB EHCI */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	162
 
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
@@ -263,7 +235,6 @@
 
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONGIG_CMD_STORAGE
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
@@ -272,7 +243,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC