X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ftao3530.h;h=52bd8370a0323cf3e67fbeecfcd2bdfbb3f6b4b4;hb=067716bac59716b07f1ee70d9bf6e5528289bb45;hp=97fe79607d510d91bc3cb69bd0fc69065b3e3a2b;hpb=09f3ca3dd53b671b009ddc4e1dad669c280094f0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 97fe796..52bd837 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -44,8 +44,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_OF_LIBFDT
-
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -66,7 +64,6 @@
  */
 #define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
@@ -93,9 +90,6 @@
 #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
@@ -103,11 +97,7 @@
 					"1920k(u-boot),128k(u-boot-env),"\
 					"4m(kernel),-(fs)"
 
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -136,7 +126,6 @@
 							/* devices */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 /* Environment information */
-#define CONFIG_BOOTDELAY		3
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
@@ -193,7 +182,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 
 /* turn on command-line edit/hist/auto */
@@ -278,7 +266,6 @@
  */
 
 /* USB EHCI */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	162