X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ft4qds.h;h=8ce337e0a764ee7cbe44b7a453963e28e2d86e8c;hb=12f05678e157ef4472b4e3611bb7ae9751487ff0;hp=5788a7095f223eca96a5c28403c563c7648e1427;hpb=a85670e40da1ef4f299effb73c36e48d39d50106;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 5788a70..8ce337e 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -32,9 +32,9 @@
 #define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
@@ -98,14 +98,12 @@
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_FSL_DDR3
 
-
 /*
  * IFC Definitions
  */
 #define CONFIG_SYS_FLASH_BASE	0xe0000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
 #else
@@ -153,19 +151,6 @@
 #define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -252,7 +237,6 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -270,13 +254,8 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -320,7 +299,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-
 #define CONFIG_BAUDRATE	115200
 
 #define CONFIG_HVBOOT				\