X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Ft4qds.h;h=4938f43985c66fe4124271178a0ea9ab8548ea92;hb=e090579d0a2d1aa38eab94b98877de9bcdd4f31d;hp=0aba18b749e0338054e7d5832117a0ebe2524aae;hpb=4f892924d238cc415891dbea336a0fdaff2f853b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 0aba18b..4938f43 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -10,12 +10,7 @@
 #ifndef __T4QDS_H
 #define __T4QDS_H
 
-#define CONFIG_CMD_REGINFO
-
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_E500MC			/* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
 #define CONFIG_MP			/* support multiple processors */
 
@@ -28,8 +23,7 @@
 #endif
 
 #define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_FSL_IFC			/* Enable IFC Support */
+#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
 #define CONFIG_PCIE1			/* PCIE controller 1 */
 #define CONFIG_PCIE2			/* PCIE controller 2 */
 #define CONFIG_PCIE3			/* PCIE controller 3 */
@@ -40,8 +34,6 @@
 #define CONFIG_SRIO1			/* SRIO port 1 */
 #define CONFIG_SRIO2			/* SRIO port 2 */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 /*
@@ -88,13 +80,11 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
-/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 #define CONFIG_DIMM_SLOTS_PER_CTLR	2
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 
 #define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR3
 
 /*
  * IFC Definitions
@@ -215,7 +205,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 /* SATA */
@@ -232,14 +221,11 @@
 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_MII		/* MII PHY management */
 #define CONFIG_ETHPRIME		"FM1@DTSEC1"
-#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
 /*
@@ -251,12 +237,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
 
 /*
  * Miscellaneous configurable options
@@ -265,14 +245,6 @@
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -296,8 +268,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BAUDRATE	115200
-
 #define CONFIG_HVBOOT				\
  "setenv bootargs config-addr=0x60000000; "	\
  "bootm 0x01000000 - 0x00f00000"